esp-dev-kits

中文版

Overview

esp-dev-kits provides in-depth information on selected development boards embedded with different Espressif SoCs, such as ESP32, ESP32-S2, and ESP32-S3. For the list of all available boards, see the Products > DevKits page on the Espressif website. With esp-dev-kits, you can easily get started with Espressif development boards and build your IoT applications.

esp-dev-kits contains the following information for development boards designed by Espressif:

User guides
Hardware resources
Firmware
Demo code

Developing with esp-dev-kits

Quick Start

esp-dev-kits is developed based on ESP-IDF functions and tools, so the ESP-IDF development environment must be set up first. If this is your first exposure to ESP-IDF, proceed to Get Started documentation specific for ESP32, ESP32-S2, ESP32-S3, or ESP32-C3 SoCs.

Click one of the development boards shown below to set up and start using esp-dev-kits.

Supported Development Boards

ESP32-C3 Development Boards

Board	Picture	Description
ESP32-C3-LCDkit		ESP32-C3-LCDkit is a development board for evaluating and verifying ESP32-C3 chip and SPI interface screen. The motherboard of ESP32-C3-LCDkit integrates ESP32-C3-MINI-1 module and it has the functions of screen interaction through rotary encoder switch. It also has audio player and infrared wireless control functions.

ESP32-S3 Development Boards

Board	Picture	Description
ESP32-S3-USB-OTG		ESP32-S3-USB-OTG is targeting at applications based on USB interface. It is equipped with the ESP32-S3-MINI-1-N8 module. Combined with the Wi-Fi functionality provided by the SoC, the USB interface can be used for video streaming over Wi-Fi, accessing the Internet through a 4G hotspot, connecting to a wireless USB disk, and many other applications.
ESP32-S3-LCD-EV-BOARD		ESP32-S3-LCD-EV-BOARD is a development board for evaluating and verifying ESP32-S3 screen interactive applications. The motherboard of ESP32-S3-LCD-EV-BOARD integrates ESP32-S3-WROOM-1 module and it has the functions of touch screen interaction and voice interaction.

ESP32-S2 Development Boards

Board	Picture	Description
ESP32-S2-Kaluga-1		The new multimedia development board ESP32-S2-Kaluga-1 based on ESP32-S2 has various functions, such as an LCD screen display, touch panel control, camera image acquisition, audio playback, etc. It can be flexibly assembled and disassembled, thus fulfilling a variety of customized requirements.

Other Boards

Board	Picture	Description
ESP-Prog		ESP-Prog is one of Espressif’s development and debugging tools, with functions including automatic firmware downloading, serial communication, and JTAG online debugging. ESP-Prog's automatic firmware downloading and serial communication functions are supported on both the ESP8266 and ESP32 platforms, while the JTAG online debugging is supported only on the ESP32 platform. ESP-Prog uses FT2232HL as its USB Bridge Controller chip.

ESP32 Development Boards

Board	Picture	Description
ESP32-LCDKit		ESP32-LCD-Kit is an HMI (Human Machine Interface) development board based on ESP32-DevKitC (need to purchase if you didn’t have one). ESP32-LCDKit is integrated with such peripherals as SD-Card, DAC-Audio, and can be connected to an external display. The board is mainly used for HMI-related development and evaluation. The development board is designed to support SPI serial interface, 8-bit parallel interface and 16-bit parallel screen interfaces.

EOL (End of Life) Boards

Board	Picture	Description
ESP32-S2-HMI-DevKit-1		ESP32-S2-HMI-DevKit-1 has been specifically designed for human-machine interfaces in smart-home automation controllers, smart speakers with display, smart alarm clocks, etc. It is powered by the ESP32-S2-WROVER module, which supports a 4.3-inch LCD screen. It has a 1950 mAh rechargeable lithium battery and peripheral interfaces such as Prog & UART, SPI, TWAI, I2C, and an SD card.
ESP32-Sense-Kit		ESP32-Sense Kit is used for evaluating and developing ESP32 touch sensor system. ESP32-Sense Kit consists of one motherboard and multiple daughterboards. The motherboard contains a display unit, a main control unit and a debug unit. The daughterboards have touch electrodes in different combinations or shapes, such as linear slider, wheel slider, matrix buttons and spring buttons, depending on the application scenarios.
ESP32-MeshKit-Sense		ESP32-MeshKit-Sense is a development board with an ESP32 module at its core. It features peripherals, such as a temperature and humidity sensor, an ambient light sensor, etc. The board can be interfaced with screens. The board is mainly used to detect the current consumption of ESP32 modules in a normal operation state or in sleep mode, when connected to different peripherals.
ESP32-S2-Touch-DevKit-1		ESP32-S2-Touch-Devkit-1 is a development kit that is aimed at helping evaluate and develop capacitive touch sensor applications on ESP32-S2. It is made up of Motherboard-Subboard structure. The motherboard of ESP32-S2-Touch-Devkit-1 integrates ESP32-S2-MINI-1 controller module and several useful little components such as buzzer, digital tube, RGB light, and so on.

Resources