Several sounds are emitted every time the printer is turned on

[Anjelusky]

If I enable the sounds, a lot of annoying sounds are emitted every time the printer is turned on .. how can I solve it?

this is what I get from the serial:

start
echo:Marlin bugfix-2.0.x

echo: Last Updated: 2018-01-20 | Author: Anjelusky
echo:Compiled: Jul 26 2020
echo: Free Memory: 4820 PlannerBufferBytes: 1456
echo:V67 stored settings retrieved (594 bytes; crc 54711)
echo: G21 ; Units in mm (mm)

echo:Filament settings: Disabled
echo: M200 D1.75
echo: M200 D0
echo:Steps per unit:
echo: M92 X80.12 Y80.12 Z399.78 E445.00
echo:Maximum feedrates (units/s):
echo: M203 X300.00 Y300.00 Z50.00 E40.00
echo:Maximum Acceleration (units/s2):
echo: M201 X2000.00 Y2000.00 Z100.00 E10000.00
echo:Acceleration (units/s2): P<print_accel> R<retract_accel> T<travel_accel>
echo: M204 P800.00 R10000.00 T2000.00
echo:Advanced: B<min_segment_time_us> S<min_feedrate> T<min_travel_feedrate> X<max_x_jerk> Y<max_y_jerk> Z<max_z_jerk> E<max_e_jerk>
echo: M205 B20000.00 S0.00 T0.00 X8.00 Y8.00 Z0.30 E5.00
echo:Home offset:
echo: M206 X0.00 Y0.00 Z0.00
echo:Auto Bed Leveling:
echo: M420 S0 Z0.00
echo: G29 W I0 J0 Z0.04002
echo: G29 W I1 J0 Z0.06253
echo: G29 W I2 J0 Z0.06754
echo: G29 W I0 J1 Z-0.04753
echo: G29 W I1 J1 Z0.01251
echo: G29 W I2 J1 Z0.02501
echo: G29 W I0 J2 Z-0.09255
echo: G29 W I1 J2 Z-0.06253
echo: G29 W I2 J2 Z-0.04002
echo:PID settings:
echo: M301 P14.58 I1.14 D46.57
echo: M304 P244.21 I45.87 D325.08
echo:Z-Probe Offset (mm):
echo: M851 Z0.00
ok T:11.30 /0.00 B:12.03 /0.00 @:0 B@:0
FIRMWARE_NAME:Marlin bugfix-2.0.x (Github) SOURCE_CODE_URL:https://github.com/MarlinFirmware/Marlin PROTOCOL_VERSION:1.0 MACHINE_TYPE:Genius EXTRUDER_COUNT:1 UUID:cede2a2f-41a2-4748-9b12-c55c62f367ff
Cap:SERIAL_XON_XOFF:0
Cap:BINARY_FILE_TRANSFER:0
Cap:EEPROM:1
Cap:VOLUMETRIC:1
Cap:AUTOREPORT_TEMP:1
Cap:PROGRESS:0
Cap:PRINT_JOB:1
Cap:AUTOLEVEL:1
Cap:Z_PROBE:1
Cap:LEVELING_DATA:1
Cap:BUILD_PERCENT:0
Cap:SOFTWARE_POWER:0
Cap:TOGGLE_LIGHTS:0
Cap:CASE_LIGHT_BRIGHTNESS:0
Cap:EMERGENCY_PARSER:0
Cap:PROMPT_SUPPORT:0
Cap:AUTOREPORT_SD_STATUS:0
Cap:THERMAL_PROTECTION:1
Cap:MOTION_MODES:0
Cap:CHAMBER_TEMPERATURE:0
ok
echo: G21 ; Units in mm (mm)

echo:Filament settings: Disabled
echo: M200 D1.75
echo: M200 D0
echo:Steps per unit:
echo: M92 X80.12 Y80.12 Z399.78 E445.00
echo:Maximum feedrates (units/s):
echo: M203 X300.00 Y300.00 Z50.00 E40.00
echo:Maximum Acceleration (units/s2):
echo: M201 X2000.00 Y2000.00 Z100.00 E10000.00
echo:Acceleration (units/s2): P<print_accel> R<retract_accel> T<travel_accel>
echo: M204 P800.00 R10000.00 T2000.00
echo:Advanced: B<min_segment_time_us> S<min_feedrate> T<min_travel_feedrate> X<max_x_jerk> Y<max_y_jerk> Z<max_z_jerk> E<max_e_jerk>
echo: M205 B20000.00 S0.00 T0.00 X8.00 Y8.00 Z0.30 E5.00
echo:Home offset:
echo: M206 X0.00 Y0.00 Z0.00
echo:Auto Bed Leveling:
echo: M420 S0 Z0.00
echo: G29 W I0 J0 Z0.04002
echo: G29 W I1 J0 Z0.06253
echo: G29 W I2 J0 Z0.06754
echo: G29 W I0 J1 Z-0.04753
echo: G29 W I1 J1 Z0.01251
echo: G29 W I2 J1 Z0.02501
echo: G29 W I0 J2 Z-0.09255
echo: G29 W I1 J2 Z-0.06253
echo: G29 W I2 J2 Z-0.04002
echo:PID settings:
echo: M301 P14.58 I1.14 D46.57
echo: M304 P244.21 I45.87 D325.08
echo:Z-Probe Offset (mm):
echo: M851 Z0.00
ok
echo: M92 X80.12 Y80.12 Z399.78 E445.00
ok
echo:Bed Leveling ON
echo:Fade Height OFF