Using this program out side of my local network
Closed this issue · 2 comments
GoogleCodeExporter commented
I would love to use this program out side of my local network but do not know
how to configure my
Apple Airport to do this. Can someone help.
Original issue reported on code.google.com by Tim.Smit...@gmail.com on 9 Jul 2007 at 3:55
GoogleCodeExporter commented
Yes,
If you don't have the latest Airport Utility, get it from Apple.
Open the Airport Utility program, select the base station, and enter manual
setup (command-L)
-Get Some Info
Click Internet
Find the DNS servers and right them down
Click DHCP and right down the beginning and ending address
- Setup computer
Go to your computer
Open network preferences
Location -> edit locations
Copy Automatic as Static
Ht Done
Select Static, show airport
Click TCP/IP
Configure IPv4 manually
IP address as one above ending address
Router as base station LAN address (look at automatic settings)
enter DNS servers - one on each line
Apply now
-Configure base station
Go back to utility
click NAT
check enable NAT port Mapping protocol
click configure port mappings
add
public and private TCP ports whatever is set in your iPhone Remote prefs
private address is the static address of your computer
update
Original comment by dsj...@gmail.com on 9 Jul 2007 at 4:53
GoogleCodeExporter commented
Would be best to take this sort of advice to the discussion group -- this is
not a TK issue
ps dsjove you should make a wiki page with your helpful info!
Original comment by bwhit...@gmail.com on 9 Jul 2007 at 1:50
- Changed state: Invalid