phocos any-grid inverter supported?

[test2a]

i own a phocos anygrid solar inverter that has a built in mppt solar charge controller. it has an rs-232 interface which i hope i can use woth a raspbery pi to get data into home assistant.

https://www.phocos.com/product/psw-h-hybrid-inverter-charger/

https://web.archive.org/web/20200919221625/https://www.phocos.com/wp-content/uploads/2019/10/Any-Grid_PSW-H_EN-manual_2020-07-29.pdf

i have tried to follow your instructions but i am getting

solarthing check --port /dev/ttyUSB0 --type tracer --modbus 1 --scan Going to open serial port using default serial configuration... Successfully opened serial port... Checking on address: 1 Got timeout. This means that the modbus address is incorrect or that the cable is not functioning properly.

[retrodaredevil]

SolarThing does not support any inverters except for Outback inverters connected to an Outback Mate unit.

So no, that inverter is not supported by SolarThing.

[test2a]

alright thanks