Wacca touch and led error
Opened this issue · 6 comments
I've downloaded the newest update of WacVR and since then the wacca led and touch does not work anymore. The wacca initialisation screen does give a success on wacca Led. But it does not light up in wacvr. And wacca touch gives a fail.
Did you set [touch] enable = 1 in your xxxxtools.ini? And some PC will cashing the DLL file, I need the out put of both cmd window
Yes, [touch] enable = 0 and i don't see special things happening in terminal. It just looks like the same when it worked.
not 0, when you use mercuryio it should be set to 1
The issue stays the same except the terminal does give something different
I don't know if any of this is causing an issue with wacvr.
pls try the latest build again
Same here, latest version, touch failed.
--- Begin mercury_pre_startup ---
DVD: hook enabled.
Reg hook init
Wacca IO: Using custom IO DLL: mercuryio.dll
initSharedMemory
SharedMemory Size: 116
Elisabeth: Init
Wacca touch: Init
--- End mercury_pre_startup ---
Security: Opened handle
Pcbid: Get PCB serial
Security: nusec_ioctl_get_nvram_geometry
Security: nusec_ioctl_get_nearfull
Hwmon: Opened device
AmVideo: amDllVideoOpen
AmVideo: amDllVideoSetResolution
AmVideo: amDllVideoClose
Netenv: GetAdaptersInfo: Virtualized LAN configuration:
Netenv: Interface IP : 192.168.174. 11
Netenv: Router IP : 192.168.174.254
Netenv: MAC Address : 01:02:03:04:05:06
Netenv: GetAdaptersInfo: Virtualized LAN configuration:
Netenv: Interface IP : 192.168.174. 11
Netenv: Router IP : 192.168.174.254
Netenv: MAC Address : 01:02:03:04:05:06
SetupAPI: Interface {4d1e55b2-...} -> Device node $io4\vid_0ca3
USB I/O: Device opened
USB I/O: Get manufacturer string
USB I/O: Get product string
Netenv: GetBestRoute ip4 0 -> ip4 0
USB I/O: Clear board status
USB I/O: Set comm timeout
USB I/O: Set sampling count
USB I/O: GPIO Out
Netenv: GetBestRoute ip4 0 -> ip4 c0a8ae0b
Netenv: GetBestRoute ip4 0 -> ip4 c0a8ae0b
Netenv: Virtualized ICMP Ping to ip4 c0a8aefe
Netenv: Virtualized ICMP Ping to ip4 c0a8aefe
Netenv: Virtualized ICMP Ping to ip4 c0a8aefe
Netenv: Virtualized ICMP Ping to ip4 c0a801db
Netenv: Virtualized ICMP Ping to ip4 c0a801db
Netenv: Virtualized ICMP Ping to ip4 c0a801db
NFC Assembly: Starting backend DLL
NFC: felicaPath GetLastError 2
NFC 00: Reset
RGB LED 08: Reset
RGB LED 08: Get info
--- Begin mercury_pre_startup ---
DVD: hook enabled.
Reg hook init
Wacca IO: Using custom IO DLL: mercuryio.dll
initSharedMemory
SharedMemory Size: 116
Elisabeth: Init
Wacca touch: Init
--- End mercury_pre_startup ---
Clock: Returning JST timezone
Clock: Returning JST timezone
onecore\net\netprofiles\service\src\nsp\dll\namespaceserviceprovider.cpp(550)\nlansp_c.dll!00007FF9BEE1D93D: (caller: 00007FF9D675ACF6) LogHr(1) tid(89a4) 8007277C No such service is known. The service cannot be found in the specified name space.
Gfx: ShowWindow hook hit
clientcore\windows\advcore\ctf\uim\tim.cpp(800)\msctf.dll!00007FF9D70462B9: (caller: 00007FF9D7045A17) LogHr(1) tid(89a4) 8007029C An assertion failure has occurred.
clientcore\windows\advcore\ctf\uim\tim.cpp(800)\msctf.dll!00007FF9D70462B9: (caller: 00007FF9D7045A17) LogHr(2) tid(89a4) 8007029C An assertion failure has occurred.
Gfx: ShowWindow hook hit
D3D11: D3D11CreateDevice hook hit
clientcore\windows\advcore\ctf\uim\tim.cpp(800)\msctf.dll!00007FF9D70462B9: (caller: 00007FF9D7046EEC) LogHr(3) tid(4e90) 8007029C An assertion failure has occurred.
clientcore\windows\advcore\ctf\uim\tim.cpp(800)\msctf.dll!00007FF9D70462B9: (caller: 00007FF9D7046EEC) LogHr(4) tid(4e90) 8007029C An assertion failure has occurred.
D3D11: D3D11CreateDevice hook hit
D3D11: D3D11CreateDevice hook hit
D3D11: D3D11CreateDevice hook hit
D3D11: D3D11CreateDevice hook hit
Gfx: ShowWindow hook hit
Elisabeth: my_USBIntLED_Init hit!
Wacca touch0: Starting backend
Wacca Touch0: Get sync board version
Wacca touch1: Starting backend
Wacca Touch1: Get sync board version
Wacca Touch0: Read section 30
Wacca Touch1: Read section 30
Wacca Touch0: Read section 31
Wacca Touch1: Read section 31
Wacca Touch0: Read section 33
Wacca Touch1: Read section 33
Wacca Touch0: Get sync board version
Wacca Touch1: Get sync board version
Wacca Touch0: get unit board version
Wacca Touch1: get unit board version
Wacca Touch0: Command A2
Wacca Touch1: Command A2
Wacca Touch0: Command 94
Wacca Touch1: Command 94
Wacca Touch0: Start Auto
Wacca Touch1: Start Auto
Wacca Touch0: Start Auto
Wacca Touch1: Start Auto