Question: Why no opening switch in the module?
SAOPP opened this issue · 9 comments
Hi!
I'm playing with your module right now. Thanks for your work!
But I immediately had a question after connecting, why is the firmware not equipped with a switch that would send a signal to open?
Having looked at the diagram, I could not draw a conclusion for myself, I'm wondering why such an implementation is now, and what is missing for the opportunity to add this switch?
Thanks.
Hey, thanks for an answer. So, I understand correctly, if during a incoming call, I switch from never
mode to (for example) once
or always
- will the module open the door? Right?
Yes. You are absolutely right
Thanks homie! Have a nice day!
Btw, I almost forgot, I'll write it down here, ideally, the following things are missing:
- this is a switch opening out of the box in the firmware
- these are the possibilities of soldering an external button on the board, for opening, for example, when there is a need to make button outside of the case or connect this button to existing button in intercom phone
I hope this will appear in the next versions of the firmware and the module itself, thanks in any case homie, a cool project, in particular, catch five for zigbee kehd. ;)
And I immediately came up with another 1 point:
- this is the addition of a LED that will notify about the current operating mode of the intercom
This option, but it is very convenient in everyday life. I think it's all from my side now.
I would be glad to hear any comments on the above points, thank you.
- This can be done with an external converter.
- it is possible, see X4. pin 1.2.
- The LED displays the current mode anyway. Read the description.
- ok
- I will see it, thanks
- yes, but when I switch modes, my led is silent at all, and I'm talking about displaying the led status in real time
- It shows mode right after change. Not during idle.
Feel free to make PR 😀