Shelly RGBW2 refuses to flash
thunder312 opened this issue · 16 comments
Hi folks,
I just tried to flash my Shelly RGBW2 with Tasmota.
The links was (using tasmota, because dasker is offline):
http://192.168.178.75/ota?url=http://ota.tasmota.com/tasmota/shelly/mg2tasmota-ShellyRGBW2.zip
Is it possible, that the pre-built patch isn't suitable?
Because as far as I read the log (below), the Shelly accepts only patches with "rgbw2- color" or "rgbw2-white".
Yes the shelly can handle 1 color led stripe or 4 white led stripes.
I tried both modes, before patching.
Do I need to build my own patch? Please say no. :-/
The JSON output was:
{"status":"updating","has_update":false,"new_version":"20230511-223416/v1.13.1-gb0b8c19","old_version":"20230511-223416/v1.13.1-gb0b8c19"}
As you can see:
old version = new version, which is the newest Shelly default firmware.
The LOG:
122687570:1687699693973873 mgos_sys_config.c:323 Saved to conf9.json
122967750 mgos_http_server.c:180 0x3fff2a04 HTTP connection from 192.168.178.98:50679
125867680 mgos_http_server.c:180 0x3fff2a04 HTTP connection from 192.168.178.98:50680
125887472 json.c:426 RAM: 50936 total, 35220 free
130219455 mgos_http_server.c:180 0x3fff2b34 HTTP connection from 192.168.178.98:50681
130227358 shelly_update.c:168 Starting ota from http://ota.tasmota.com/tasmota/shelly/mg2tasmota-ShellyRGBW2.zip
130253967 mgos_http_server.c:180 0x3fff2b34 HTTP connection from 192.168.178.98:50682
130733276 mgos_ota_http_clien:276 Update URL: http://ota.tasmota.com/tasmota/shelly/mg2tasmota-ShellyRGBW2.zip
130895693 mgos_ota_core.c:268 Starting, timeout 240, commit timeout 0, mem 34416
130936458 mgos_ota_core.c:652 FW: rgbw2 esp8266 0.3.1 20201204-114410 sig 0x00
130940819 shelly_update.c:90 BEGIN: rgbw2
130944970 shelly_update.c:98 will not update rgbw2-white with rgbw2
130949113 cloud_aes.c:165 Cloud already closed or not connected
130954564 mgos_ota_core.c:1050 Update finished, result -13 (Aborted by event handler)
130965639 shelly_update.c:111 SHOTA: error Aborted by event handler
130969646 shelly_update.c:130 OTA is fubar
130974832 mgos_system.c:58 Rebooting in 500 ms
131429191 esp_main.c:138 SDK: state: 5 -> 0 (0)
131434069 esp_main.c:138 SDK: rm 0
131438529 esp_main.c:138 SDK: pm close 7
131446738 mgos_wifi.c:70 WiFi STA: Disconnected, reason: 8
131452463 esp_main.c:138 SDK: sleep enable,type: 2
131458280 mgos_net.c:84 WiFi STA: disconnected
131463387 shelly.c:312 WiFi status=1313166336; mode=1
131469132 coiot.c:491 Coap listener 0x3fff2274 is closed!
131474397 coiot.c:616 coap_connect, WIFI status=1313166336 mode=1
Thanks for helping,
Daniel
Originally posted by @thunder312 in #95 (comment)
+1
Same issue, either get
will not update rgbw2-white with rgbw2
or
will not update rgbw2-color with rgbw2
Same issue, same FW version 20230511-223325/v1.13.1-gb0b8c19
Hello,
I repacked the archive and it should work now, if you are on the rgbw2-color mode. Link you can use is here:
http://dl.nekohell.eu/mg2tasmota-ShellyRGBW2c.zip
Hello, I repacked the archive and it should work now, if you are on the rgbw2-color mode. Link you can use is here: http://dl.nekohell.eu/mg2tasmota-ShellyRGBW2c.zip
How did you repack? Can you also repack for the Dimmer2? Many thanks in advance.
Depending on what is the problem with dimmer2
In this case, I had to unzip the version that was failing with will not update rgbw2-color with rgbw2. There is a manifest.json file, where I had to replace rgbw2 with rgbw2-color to fool the original shelly.
This needs to be carefully repacked again. Carefully, because the files then have to be repacked and the manifest.json has to be the first file in new zip. On linux it goes like zip -Z store -r mg2tasmota-ShellyRGBW2c.zip ./rgbw2-0.3.1/manifest.json ./rgbw2-0.3.1/esp_init_data_default_v08.bin ./rgbw2-0.3.1/fs.bin ./rgbw2-0.3.1/rboot.bin ./rgbw2-0.3.1/rgbw2.bin
So if only the renaming is needed, here is your manual :-) I have found this on some german forum. Not much else I can do in case it does not work.
@pedymaster Good solution and very easy. 🥇
That worked great indeed pedymaster.
In my case it had to be rgbw2-white instead of color that did the trick.
I have the same problem as bbccdd - i also need a image for rgbw2-white . I already have take a look at mos tools, to build a image by my own - but i wasn't able to get mos running on my debian.
Please help!
And what exactly are you missing in this thread?
Either before flashing configure your shelly rgbw2 to color mode instead of white (and then you can use my image) or just replace rgbw2-color for rgbw2-white in my steps and make your own
Oh, ok.
Thanks for the info - but i have already flash it with a FTDI Adapter. I will try it on the next device (i have some in the ToDo list :-).
@pedymaster there are 2places with rgbw2. which one need to change in rgbw2-color?
"name": "rgbw2",
"src": "rgbw2.bin"
HI everyone,
im new here and I wish to choose the right forum.
I have a shelly RGBW2 and I try to install tasmota by ota
I use the link
http://shellyip/ota?url=http://dl.dasker.eu/firmware/mg2tasmota-ShellyRGBW2.zip
but it doesn't work
here the message
{
"status": "updating",
"has_update": false,
"new_version": "20230913-113259/v1.14.0-gcb84623",
"old_version": "20221013-134509/v1.12-1-g1abbae93c-rgbw2-prod",
"beta_version": "20231107-164040/v1.14.1-rc1-g0617c15"
}
Can someone help me???
Thank you everyone
HI everyone, im new here and I wish to choose the right forum. I have a shelly RGBW2 and I try to install tasmota by ota
I use the link http://shellyip/ota?url=http://dl.dasker.eu/firmware/mg2tasmota-ShellyRGBW2.zip but it doesn't work here the message
{ "status": "updating", "has_update": false, "new_version": "20230913-113259/v1.14.0-gcb84623", "old_version": "20221013-134509/v1.12-1-g1abbae93c-rgbw2-prod", "beta_version": "20231107-164040/v1.14.1-rc1-g0617c15" }
Can someone help me???
Thank you everyone
The dl.dasker.eu web host with the firmwares is down, try
http://shellyip/ota?url=http://dl.nekohell.eu/mg2tasmota-ShellyRGBW2c.zip for rgbw2 in color mode
HI everyone, im new here and I wish to choose the right forum. I have a shelly RGBW2 and I try to install tasmota by ota
I use the link http://shellyip/ota?url=http://dl.dasker.eu/firmware/mg2tasmota-ShellyRGBW2.zip but it doesn't work here the message
{ "status": "updating", "has_update": false, "new_version": "20230913-113259/v1.14.0-gcb84623", "old_version": "20221013-134509/v1.12-1-g1abbae93c-rgbw2-prod", "beta_version": "20231107-164040/v1.14.1-rc1-g0617c15" }
Can someone help me???
Thank you everyoneThe dl.dasker.eu web host with the firmwares is down, try http://shellyip/ota?url=http://dl.nekohell.eu/mg2tasmota-ShellyRGBW2c.zip for rgbw2 in color mode
THANK YOU SO MUCH!
That's perfect
Hi together,
I also want to flash my rgbw2 but nothing is happening ,,, :/
Tried both urls:
http://ota.tasmota.com/tasmota/shelly/mg2tasmota-ShellyRGBW2.zip
and
http://dl.nekohell.eu/mg2tasmota-ShellyRGBW2c.zip
without success :/
My RGBW2 is in color mode.
Its my first shelly, how can I get the log?
Under Logs over the shelly web ui nothing appears.
Edit:
Okay, found out to retreive the logs (by right click & download and not simply opening the link):
153733143 shelly_update.c:168 Starting ota from http://dl.nekohell.eu/mg2tasmota-ShellyRGBW2c.zip
153741593 mgos_http_server.c:180 0x3fff22e4 HTTP connection from 192.168.178.100:60410
154238696 mgos_ota_http_clien:276 Update URL: http://dl.nekohell.eu/mg2tasmota-ShellyRGBW2c.zip
154354900 mgos_ota_http_clien:149 Got redirect: [https://dl.nekohell.eu/mg2tasmota-ShellyRGBW2c.zip]
154359674 mgos_ota_http_clien:276 Update URL: https://dl.nekohell.eu/mg2tasmota-ShellyRGBW2c.zip
154374286 mgos_ota_http_clien:107 Failed to connect
154378858 shelly_update.c:111 SHOTA: error Failed to connect
154383344 shelly_update.c:130 OTA is fubar
154388023 mgos_system.c:58 Rebooting in 500 ms
and
149400244 shelly_update.c:168 Starting ota from http://ota.tasmota.com/tasmota/shelly/mg2tasmota-ShellyRGBW2.zip
149905588 mgos_ota_http_clien:276 Update URL: http://ota.tasmota.com/tasmota/shelly/mg2tasmota-ShellyRGBW2.zip
150007945 mgos_ota_core.c:268 Starting, timeout 240, commit timeout 0, mem 36300
150025950 mgos_ota_core.c:652 FW: rgbw2 esp8266 0.3.1 20201204-114410 sig 0x00
150030624 shelly_update.c:90 BEGIN: rgbw2
150036064 shelly_update.c:98 will not update rgbw2-color with rgbw2
150040581 cloud_aes.c:162 Closing 0x3fff1744
150045268 mgos_ota_core.c:1050 Update finished, result -13 (Aborted by event handler)
Like expected as I read this thread, the tasmota link is not working because of the color suffix refusal. But looks like it can connect to it.
But I dont get why the nekohell link is not working. I can download the zip normally over the browser.
Someone any guess?
Edit2:
Don't exactly know the issue (maybe because its redirected to https instead of http), but hosted the file locally on my Synology NAS, and this worked,
thanks to @pedymaster