Shelly Plug (not S and not US version)

Question

Shelly Plug (not S and not US version)

Closed this issue 4 years ago · 8 comments

It’s possible to use this method on a shelly plug https://shelly.cloud/products/shelly-plug-smart-home-automation-device/ ? Thank you

edit: I believe that the device is a SHPLG2-1

Answer 1 · 2020-12-23T18:02:42.000Z

I'll look into it right after fixing the update problem with RGBW2, but I think it should be possible

Answer 2 · 2020-12-27T22:07:41.000Z

There are two firmware versions, SHPLG-1 and SHPLG2-1. Lets see if it is SHPLG2-1: http://shellyip/ota?url=http://dl.dasker.eu/plug2/firmware.zip

Does that work?

Answer 3 · 2020-12-28T22:47:42.000Z

Something went wrong... the ota worked but then I updated to 9.2.0 and bricked my device.

Answer 4 · 2020-12-29T08:06:40.000Z

Ok, just to confirm: You initially had a working version of tasmota? If so, what did you do next?

Answer 5 · 2020-12-29T12:05:05.000Z

Yes it was working but I upgrade to tasmota 9.2.0 minimal and it worked and then I installed tasmota 9.2.0 and nothing. I used the web gui and choose file for the upgrade.

Answer 6 · 2020-12-29T13:17:06.000Z

I'm afraid this is more of a Tasmota issue than a problem with this tool 😐 The moment the first version of Tasmota boots, my code is done running. This wiki page should give you all the details you need, or you can open an issue at arendst/tasmota.

Answer 7 · 2020-12-29T13:40:10.000Z

True. Will do. Just for future reference this plug has two versions, one with an ESP chip and another with a CC3200 chip. According to a post on the official facebook support page the plug v2 is the ESP chip.

Answer 8 · 2020-12-29T13:55:53.000Z

Just for future reference this plug has two versions, one with an ESP chip and another with a CC3200 chip. According to a post on the official facebook support page the plug v2 is the ESP chip.

This is actually good to know. Thank you, and good luck with the unbricking!