Debug the MSP-EXP432P401R using the onboard tools

Question

Debug the MSP-EXP432P401R using the onboard tools

Closed this issue 2 years ago · 9 comments

HI.
Ask this question again. I now have a board that can be debugged using the onboard tools. I now want to use XDS110 in platformio, how can I write platformio.ini

Answer 1 · 2022-09-15T12:08:28.000Z

Try:

[env:development]
platform = https://github.com/zceemja/platform-timsp432.git
board = lpmsp432p401r
framework = arduino

Check if it compiles and uploads basic code, then try adding breakpoints and "run and debug" in vscode

Answer 2 · 2022-09-15T14:39:56.000Z

Not working. platformio tell me：

Configuring upload protocol...
AVAILABLE: dslite
CURRENT: upload_protocol = dslite
Uploading .pio\build\lpmsp432p401r\firmware.elf
DSLite version 9.2.0.1793
Configuring Debugger (may take a few minutes on first launch)...
Initializing Register Database...
Initializing: CS_DAP_0
Executing Startup Scripts: CS_DAP_0
Initializing: CORTEX_M4_0
Executing Startup Scripts: CORTEX_M4_0
Connecting...
GEL: CORTEX_M4_0: GEL Output: Memory Map Initialization Complete
GEL: CORTEX_M4_0: GEL Output: Halting Watchdog Timer
GEL: CORTEX_M4_0: WARNING : On MSP432P401R hitting a breakpoint cannot be detected by the debugger when the device is in low power mode. Click the pause button during debug to check if the device is held at the breakpoint. error: CORTEX_M4_0: Error initializing flash programming: Your XMS432P401R material is no longer supported. We recommend you moving to production-quality MSP432P401R/M silicon by ordering samples at www.ti.com/product/MSP432P401R.` `Loading Program: .pio\build\lpmsp432p401r\firmware.elf` ` Preparing ... ` ` .text: 0 of 150596 at 0x0` `warning: CORTEX_M4_0: Loader: One or more sections of your program falls into a memory region that is not writable. These regions will not actually be written to the target. Check your linker configuration and/or memory map. error: CORTEX_M4_0: File Loader: Verification failed: Values at address 0x00000000 do not match Please verify target memory and memory map. Finished Failed: File: .pio\build\lpmsp432p401r\firmware.elf: a data verification error occurred, file load failed. *** [upload] Error 1`

Answer 3 · 2022-09-15T15:48:48.000Z

Debug does not work with dslite uploader, with latest commit it should be set to openocd. Try adding in platformio.ini

upload_protocol = openocd

And make sure that platform = https://github.com/zceemja/platform-timsp432.git

Answer 4 · 2022-09-16T00:40:58.000Z

I reinstalled the platform, uploaded with the default options, and now my XDS110 works, but I still get the error, the problem comes from the MCU。

Configuring upload protocol...
AVAILABLE: dslite
CURRENT: upload_protocol = dslite
Uploading .pio\build\lpmsp432p401r\firmware.elf
DSLite version 9.2.0.1793
Configuring Debugger (may take a few minutes on first launch)...
        Initializing Register Database...
        Initializing: CS_DAP_0
        Executing Startup Scripts: CS_DAP_0
        Initializing: CORTEX_M4_0
        Executing Startup Scripts: CORTEX_M4_0
Connecting...
GEL: CORTEX_M4_0: GEL Output: Memory Map Initialization Complete
GEL: CORTEX_M4_0: GEL Output: Halting Watchdog Timer
GEL: CORTEX_M4_0: WARNING   : On MSP432P401R hitting a breakpoint cannot be detected by the debugger when the device is in low power mode.
                         Click the pause button during debug to check if the device is held at the breakpoint.
error: CORTEX_M4_0: Error initializing flash programming: Your XMS432P401R material is no longer supported. We recommend you moving to production-quality MSP432P401R/M silicon by ordering samples at www.ti.com/product/MSP432P401R.
Loading Program: .pio\build\lpmsp432p401r\firmware.elf
        Preparing ... 
        .text: 0 of 150596 at 0x0
warning: CORTEX_M4_0: Loader: One or more sections of your program falls into a memory region that is not writable.  These regions will not actually be written to the target.  Check your linker configuration and/or memory map.
error: CORTEX_M4_0: File Loader: Verification failed: Values at address 0x00000000 do not match Please verify target memory and memory map.
        Finished
Failed: File: .pio\build\lpmsp432p401r\firmware.elf: a data verification error occurred, file load failed.
*** [upload] Error 1

My MCU seems to be locked, the problem is more complicated, I still haven't found a solution.😑😶😶😶😶😶😶😑😑
..

Answer 5 · 2022-09-16T14:40:42.000Z

There is something not right with your config. "CURRENT: upload_protocol = dslite" it should not be dslite. Can you send platformio.ini?

Answer 6 · 2022-09-17T02:57:10.000Z

; PlatformIO Project Configuration File
;
;   Build options: build flags, source filter
;   Upload options: custom upload port, speed and extra flags
;   Library options: dependencies, extra library storages
;   Advanced options: extra scripting
;
; Please visit documentation for the other options and examples
; https://docs.platformio.org/page/projectconf.html

[env:lpmsp432p401r]
platform = timsp432
board = lpmsp432p401r
framework = tirtos
build_type = debug
build_flags = 
    -I .
    -I src\eeprom
    -I src\grbl
    -I src\keypad
    -I src\motors
    -I src\odometer
    -I src\plasma
    -I src\spindle
    -I src\spindle\vfd
    -I src\trinamic
    -I src

This is my PlatformIO.ini file, although there is a problem with my MCU, I feel that this configuration should work. I ordered an MCU again, and when this MCU arrives in my hands, I will test it again

Answer 7 · 2022-09-17T09:14:24.000Z

Replace
platform = timsp432
with
platform = https://github.com/zceemja/platform-timsp432.git

Answer 8 · 2022-09-17T13:09:02.000Z

Wow! Oh my God. It actually worked. I always thought it was something wrong with my chip. There are no problems now. Thank you very much

Answer 9 · 2022-09-17T13:36:58.000Z

Good to hear. I will upload update to platformio so that it would be sufficient to do this without the long link