( PS4 + SONOFF Mini R2 case +Luckfox Pico Mini B + PPPwn-Luckfox ) = Stealth Jailbreak Machine
Opened this issue · 2 comments
Hello, just to share and maybe inspire others.
As all of you, i need to Jailbreak all time that PS4 boot, and i start with an old NEXX WT3020 router, but that it's very slow, and sometimes don't work at all.
But one day the kids pull the Micro USB cable and broke the port of the NEXX.
In my mind i always have the idea to create a more permanent solution, because i have around some material and I don't want to spend more money I start with an 2P keystone plastic case that I have from a old project, but i don't like the size and format, and i abandoned the idea.
But after two days I have some lucky, because I found an old broken Sonoff Mini R2 on my desk, and the dimensions of the case caught my eyes.
After some disassembly and fitting, BINGO! we have a new plan!
After solder an old network cable and a old usb cable, we have a working prototype.
After flashing the AlpineLinux to NAND, and configured the PPPWN to run from start, huge success, I got an very fast PPPwn Jailbreak.
But something missing, to be future prof I need to have UART\TTL , and for that I will use an TRRS 3.5mm jack female that I already have.
After drill a hole
I solder 4 wires to VBUS+GND+UARTTX+UARTRX, and use some hot glue to keep all in place.
But again some luck, the default hole in the plastic case align perfect with the BOOT button of the LuckFox Pico Mini, and to protect it from the hot glue i use a piece of an old pen to create the barrier, and now it's time to TEST and close the case.
Lets see...
SUCCESS.....
Now the PS4 have a Stealth Jailbreak Mod that allow me to remove if from PS4, reflash the software, debug via TTL etc...
I hope that some of you create some mods like this :)
The final Diagram
Just forgot to show the TTL\TRSS cable that I bluid
