- Introduction
- Version
- Integration details
- Driver files information
- Supported sensor interface
- Copyright
- This package contains the Bosch Sensortec MEMS pressure sensor driver (sensor API)
- The sensor driver package includes bmp180.h, bmp180.c and bmp180_support.c files
- Version of bmp180 sensor driver is:
- bmp180.c - V2.0.3
- bmp180.h - V2.2.2
- bmp180_support.c - V1.0.4
- Integrate bmp180.h and bmp180.c file in to your project.
- The bmp180_support.c file contains only examples for API use cases, so it is not required to integrate into project.
- bmp180.h
- This header file has the register address definition, constant definitions, data type definition and supported sensor driver calls declarations.
- bmp180.c
- This file contains the implementation for the sensor driver APIs.
- bmp180_support.c
- This file shall be used as an user guidance, here you can find samples of
* Initialize the sensor with I2C communication
- Add your code to the I2C bus read and bus write functions.
- Return value can be chosen by yourself
- API just passes that value to your application code
- Add your code to the delay function
- Reading the sensor read out data
- This file shall be used as an user guidance, here you can find samples of
* Initialize the sensor with I2C communication
- Add your code to the I2C bus read and bus write functions.
- Return value can be chosen by yourself
- API just passes that value to your application code
- Add your code to the delay function
- This pressure sensor driver supports I2C and SPI interfaces
- Copyright (C) 2008 - 2015 Bosch Sensortec GmbH