# REST API SMS Gateway using gammu Simple SMS REST API gateway for sending and receiving SMS from gammu supported devices. Gammu supports standard AT commands, which are using most of USB GSM modems. ![Docker Cloud Build Status](https://img.shields.io/docker/cloud/build/pajikos/sms-gammu-gateway.svg) ![Docker Automated build](https://img.shields.io/docker/automated/pajikos/sms-gammu-gateway.svg) ![GitHub](https://img.shields.io/github/license/pajikos/sms-gammu-gateway.svg) #### Available REST API endpoints: - ##### Send a SMS 🔒 ``` POST http://xxx.xxx.xxx.xxx:5000/sms Content-Type: application/json Authorization: Basic admin password { "text": "Hello, how are you?", "number": "+420xxxxxxxxx" } ``` Example: ```bash AUTH=$(echo -ne "admin:password" | base64 --wrap 0) curl -H 'Content-Type: application/json' -H "Authorization: Basic $AUTH" -X POST --data '{"text":"Hello, how are you?", "number":"+420xxxxxxxxx"}' http://localhost:5000/sms 1 ``` If you need to customize the smsc number: ```bash curl -H 'Content-Type: application/json' -H "Authorization: Basic $AUTH" -X POST --data '{"text":"Hello, how are you?", "number":"+420xxxxxxxxx","smsc": "+33695000695"}' http://localhost:5000/sms ``` - ##### Retrieve all the SMS stored on the modem/SIM Card 🔒 ``` GET http://xxx.xxx.xxx.xxx:5000/sms ``` ```json [ { "Date": "2021-02-17 15:20:20", "Number": "+xxxxxxxxxxx", "State": "UnRead", "Text": "Hello" }, ... ] ``` - ##### Retrieve {n}th message stored on the modem/SIM Card 🔒 ``` GET http://xxx.xxx.xxx.xxx:5000/sms/{n} ``` ```json { "Date": "2021-02-17 15:20:20", "Number": "+xxxxxxxxxxx", "State": "UnRead", "Text": "Hello" } ``` - ##### Delete {n}th message stored on the modem/SIM Card 🔒 ``` DELETE http://xxx.xxx.xxx.xxx:5000/sms/{n} ``` - ##### Retrieve 1st message stored on the modem/SIM Card and delete it 🔒 ``` GET http://xxx.xxx.xxx.xxx:5000/getsms ``` ```json { "Date": "2021-02-17 15:20:20", "Number": "+xxxxxxxxxxx", "State": "UnRead", "Text": "Hello" } ``` - ##### Get the current signal strength 🔓 ``` GET http://xxx.xxx.xxx.xxx:5000/signal ``` ```json { "SignalStrength": -83, "SignalPercent": 45, "BitErrorRate": -1 } ``` - ##### Get the current network details 🔓 ``` GET http://xxx.xxx.xxx.xxx:5000/network ``` ```json { "NetworkName": "DiGi", "State": "RoamingNetwork", "PacketState": "RoamingNetwork", "NetworkCode": "502 16", "CID": "00A18B30", "PacketCID": "00A18B30", "GPRS": "Attached", "PacketLAC": "7987", "LAC": "7987" } ``` - ##### Reset the modem (see FAQ for more info) 🔓 ``` GET http://xxx.xxx.xxx.xxx:5000/reset ``` ```json { "Status": 200, "Message": "Reset done" } # Usage There are two options how to run this REST API SMS Gateway: * Standalone installation * Running in Docker ## Prerequisites Either you are using Docker or standalone installation, your GSM modem must be visible in the system. When you put a USB stick to your system, you have to see a new USB device: ``` dmesg | grep ttyUSB ``` or typing command: ``` lsusb ``` ``` ... Bus 001 Device 009: ID 12d1:1406 Huawei Technologies Co., Ltd. E1750 ... ``` If only cdrom device appeared, install [usb-modeswitch](http://www.draisberghof.de/usb_modeswitch) to see a modem as well: ``` apt-get install usb-modeswitch ``` ## Standalone installation This guide does not cover Python 3.x installation process (including pip), but it is required as well. #### Install system dependencies (using apt): ``` apt-get update && apt-get install -y pkg-config gammu libgammu-dev libffi-dev ``` #### Clone repository ``` git clone https://github.com/pajikos/sms-gammu-gateway cd sms-gammu-gateway ``` #### Install python dependencies ``` pip install -r requirements.txt ``` #### Edit gammu configuration You usually need to edit device property in file [gammu.config](https://wammu.eu/docs/manual/config/index.html) only, e.g.: ``` [gammu] device = /dev/ttyUSB1 connection = at ``` #### Run application (it will start to listen on port 5000): ``` python run.py ``` ## Running in Docker In a case of using any GSM supporting AT commands, you can simply run the container: ``` docker run -d -p 5000:5000 --device=/dev/ttyUSB0:/dev/mobile pajikos/sms-gammu-gateway ``` #### Docker compose: ``` version: '3' services: sms-gammu-gateway: container_name: sms-gammu-gateway restart: always image: pajikos/sms-gammu-gateway environment: - PIN="1234" ports: - "5000:5000" devices: - /dev/ttyUSB1:/dev/mobile ``` ## FAQ #### PIN configuration Pin to unblock SIM card could be set using environment variable PIN, e.g. PIN=1234. #### Authentication Out of the box, there is needed an HTTP Basic authentication to send any SMS, username and password can be configured in `credentials.txt` #### How to use HTTPS? Using environment variable SSL=True, the program expects RSA private key and certificate to provide content via HTTPS. Expected file paths (you can edit it in run.py or mount your own key/cert in Docker): ``` /ssl/key.pem /ssl/cert.pem ``` #### No more modem response ? If you have some regular problem with your modem and you don't want to disconnect and reconnect it physically to reset it, you can try to regularly use the reset function. (For example with my Huawei modem the reset function is used every 24 hours to maintain the stability of the system) #### It does not work... Try to check [gammu configuration file site](https://wammu.eu/docs/manual/config/index.html) ## Integration with Home Assistant #### Signal Strength sensor ```yaml - platform: rest resource: http://xxx.xxx.xxx.xxx:5000/signal name: GSM Signal scan_interval: 30 value_template: '{{ value_json.SignalPercent }}' unit_of_measurement: '%' ``` #### SMS notification ```yaml notify: - name: SMS GW platform: rest resource: http://xxx.xxx.xxx.xxx:5000/sms method: POST_JSON authentication: basic username: !secret sms_gateway_username password: !secret sms_gateway_password target_param_name: number message_param_name: text ``` #### Using in Automation ```yaml - alias: Alarm Entry Alert - Garage Door trigger: platform: state entity_id: binary_sensor.garage_door state: 'on' condition: - platform: state entity_id: alarm_control_panel.alarm state: 'armed_home' action: service: notify.sms_gw data: message: 'alert, entry detected at garage door' target: '+xxxxxxxxxxxx' ``` #### Receiving SMS and sending notification ```yaml sensor: - platform: rest resource: http://127.0.0.1:5000/getsms name: sms scan_interval: 20 username: !secret sms_gateway_username password: !secret sms_gateway_password json_attributes: - Date - Number - Text - State automation sms_automations: - alias: Notify on received SMS trigger: - platform: template value_template: "{{state_attr('sensor.sms', 'Text') != ''}}" action: - service: notify.mobile_app_[DEVICE] data: title: SMS from {{ state_attr('sensor.sms', 'Number') }} message: "{{ state_attr('sensor.sms', 'Text') }}" data: sticky: "true" - service: persistent_notification.create data: title: SMS from {{ state_attr('sensor.sms', 'Number') }} message: "{{ state_attr('sensor.sms', 'Text') }}" ```
14roiron/sms-gammu-gateway
Simple SMS REST API gateway for sending SMS from gammu supported devices
PythonApache-2.0