InTrace ------- http://www.swiecki.net (C) Copyright 2007 Robert Swiecki <robert@swiecki.net> 1. What is that? ==================================== InTrace is traceroute-like application that enables users to enumerate IP hops using existing TCP connections, both initiated from local network (local system) or from remote hosts. It could be useful for network reconnaissance and firewall bypassing. /* * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2 of the License, or * (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 */ 2. Locally initiated TCP connection =================================== Run intrace: --------------------------------------------------------------------- localhost# ./intrace -i eth0 -h www.freescale.com InTrace 1.2 (C)2007 Robert Swiecki <robert@swiecki.net> R: 192.88.156.10/ANY (0) L: 0.0.0.0/0 Last rcvd SEQ: 0, ACK: 0 Waiting to acquire enough packets --------------------------------------------------------------------- Establish a TCP connection: --------------------------------------------------------------------- localhost$ nc www.freescale.com 80 GET / HTTP/1.0 --------------------------------------------------------------------- Take a look at the InTrace output: --------------------------------------------------------------------- InTrace 1.2 (C)2007 Robert Swiecki <robert@swiecki.net> R: 192.88.156.10/ANY (80) L: 192.168.0.5/40005 Last rcvd SEQ: 1400545495, ACK: 3344758762 Press ENTER to start sending packets --------------------------------------------------------------------- Do as it says!.. ;) --------------------------------------------------------------------- 1. 192.158.0.1 [ICMP TTL-EXCEEDED] 2. 212.76.62.233 [ICMP TTL-EXCEEDED] 3. --- [NO RESPONSE] 4. 212.76.35.70 [ICMP TTL-EXCEEDED] 5. 212.76.35.173 [ICMP TTL-EXCEEDED] 6. 213.248.77.201 [ICMP TTL-EXCEEDED] 7. --- [NO RESPONSE] 8. 213.248.96.25 [ICMP TTL-EXCEEDED] 9. 80.91.249.137 [ICMP TTL-EXCEEDED] 10. 213.248.77.182 [ICMP TTL-EXCEEDED] 11. 67.17.68.22 [ICMP TTL-EXCEEDED] 12. 64.212.225.214 [ICMP TTL-EXCEEDED] 13. 69.25.168.1 [ICMP TTL-EXCEEDED] 14. 69.25.127.90 [ICMP TTL-EXCEEDED] 15. 191.83.158.250 [ICMP TTL-EXCEEDED] 16. 192.88.156.10 [ICMP TTL-EXCEEDED] [NAT] 17. 192.88.156.10 [TCP REPLY] --------------------------------------------------------------------- So, we found a NAT appliance at the 192.88.156.10 hop One more try with www.paypal.com -> 216.113.188.65/80 TCP reveals some details of PayPal's internal network structure. --------------------------------------------------------------------- 1. 217.17.45.185 [ICMP TTL-EXCEEDED] 2. 193.111.37.5 [ICMP TTL-EXCEEDED] 3. 212.73.253.129 [ICMP TTL-EXCEEDED] 4. --- [NO RESPONSE] 5. 64.159.1.113 [ICMP TTL-EXCEEDED] 6. 4.68.107.2 [ICMP TTL-EXCEEDED] 7. 64.156.40.98 [ICMP TTL-EXCEEDED] 8. 10.1.1.162 [ICMP TTL-EXCEEDED] <-- PayPal's 9. 10.1.1.110 [ICMP TTL-EXCEEDED] <-- internal 10. --- [NO RESPONSE] <-- network 11. 216.113.188.65 [TCP REPLY] --------------------------------------------------------------------- 3. Remotely initiated TCP connection ==================================== Take a look at remotely established TCP connections in the system TCP table and pick one of them --------------------------------------------------------------------- localhost# netstat -tanp Active Internet connections (servers and established) Proto R-Q S-Q Local Address Foreign Address State PID/Program name ... tcp 0 0 212.76.62.233:22 217.17.34.18:23203 ESTABLISHED 6321/sshd ... --------------------------------------------------------------------- Start InTrace ... --------------------------------------------------------------------- localhost# ./intrace -i eth0 -h 217.17.34.18 --------------------------------------------------------------------- ... wait for few packets (exchanged within the connection), then press ENTER. --------------------------------------------------------------------- InTrace 1.2 (C)2007 Robert Swiecki <robert@swiecki.net> R: 217.17.34.18/ANY (23203) L: 212.76.62.233/22 Last rcvd SEQ: 209707007, ACK: 29305148 Press ENTER to start sending packets 1. 212.76.43.254 [ICMP TTL-EXCEEDED] 2. --- [NO RESPONSE] 3. --- [NO RESPONSE] 4. 212.76.35.50 [ICMP TTL-EXCEEDED] 5. 212.76.35.25 [ICMP TTL-EXCEEDED] 6. 195.85.195.8 [ICMP TTL-EXCEEDED] 7. 85.232.232.65 [ICMP TTL-EXCEEDED] 8. 85.232.232.62 [ICMP TTL-EXCEEDED] 9. 217.17.34.18 [ICMP TTL-EXCEEDED] [NAT] 10. --- [NO RESPONSE] 11. 217.17.34.18 [TCP REPLY] --------------------------------------------------------------------- So, we know now that the TCP connection is actually initiated from behind the NAT appliance (hop # 9), and there is one more IP hop behind this one (hop # 10), unfortunately not responding with icmp time-exceeded. 4. Feedback ==================================== If you have any suggestions or comments, don't hesitate to contact! The address is: Robert Swiecki <robert@swiecki.net> 5. Credits ==================================== Michal Zalewski <lcamtuf@dione.ids.pl> (http://lcamtuf.coredump.cx) - initial concept and the first implementation. http://archives.neohapsis.com/archives/fulldisclosure/2007-01/0145.html