rcswitch-pi is for controlling rc remote controlled power sockets with the raspberry pi.
It work with a 315/433MHz transmitter (e.g. https://www.robofun.ro/telecomanda-prize-434MHz-daisypi-raspberry-pi?search=radio) and an radio controlled outlet having a SC5262 / SC5272, HX2262 / HX2272, PT2262 / PT2272, EV1527, RT1527, FP1527 or HS1527 chipset. It also supports Intertechno outlets.
Kudos to the projects rc-switch, wiringpi r10r/rcswitch-pi for adapting the rc-switch code to use the wiringpi library instead of the library provided by the arduino.
I just adapted the send.cpp and usage message to allow the use with all types of switches (type A, B and Intertechno C).
First you have to install the wiringpi library. For this, just execute the following commands:
git clone git://git.drogon.net/wiringPi
cd wiringPi
git pull origin
./build
Then you may install this library.
git clone https://github.com/mar1u50/rcswitch-pi
cd rcswitch-pi
Open send.cpp and update the variable PIN. I'm using BCM GPIO pin 22 and in wiring pi this means PIN=3. For more information about the mapping between GPIO pins and wiringPi pins please see [wiringPi pins] (http://wiringpi.com/pins/).
Compile the send program by running make.
Run sudo ./send to print the usage.