Issues
- 0
Poor README
#36 opened by TheStrangerDoctor - 0
poor drawing position
#35 opened by Ondryss - 10
except ValueError, e:
#32 opened by hariharan382 - 8
Vertical Raster feature needed
#34 opened by BCChad - 0
Incorporate G4 DWELL command
#33 opened by BCChad - 3
problem exporting
#30 opened by Sigbw - 9
problems with gray scale
#18 opened by DarkRabbit19 - 15
Inkscape 1.0 support
#26 opened by magdesign - 1
update needed for Inkscape version 1.0
#29 opened by brynnd - 3
PWM min / max values
#14 opened by martindb - 2
GCODE File Outputted as TXT File
#28 opened by Andyboy2 - 4
LASER STRENGTH ADJUSTMENT
#27 opened by quotelawrence - 0
Option for sorting shapes
#24 opened by sstefanov - 0
Include acceleration/deceleration slowdown
#20 opened by magdesign - 0
- 0
Grey code optimalisation for greyscale output
#17 opened by JBSchueler - 1
Output optimalisation
#15 opened by JBSchueler - 2
Coolant ON/OFF
#16 opened by JBSchueler - 1
Issues with GRBL 9j Jtech Fork
#10 opened by cojarbi - 7
G0/G1 for smoothie
#9 opened by cojarbi - 0
Varying the movement speed when the laser is off.
#12 opened by klucsik - 0
The expansion causes an error
#13 opened by AutoRich - 2
Laser Intense Control for engraving picture
#11 opened by hosa200 - 4
Please add an option to omit comments
#6 opened by eoingriffin - 0
Not working
#8 opened by athulsnair - 6
strange behaviour on the gcode
#7 opened by wasteoinc - 10
- 3
Laser not turning off
#1 opened by ripmyundies - 1
Hangs
#3 opened by ripmyundies - 7
Extension does not work
#2 opened by meatom