Issues
- 0
multiple slave id
#197 opened by heydan98 - 0
Giving portenta error
#196 opened by DineshMudumala - 0
Report Slave ID
#195 opened by ReAlMi7 - 0
MAX13487e - Error 227
#193 opened by markvdberg0 - 0
- 0
- 2
Is there an asynchronous API option?
#141 opened by juleq - 0
- 0
Communication with PLC
#190 opened by Stergios96T - 1
Possible to get raw data from slave?
#186 opened by mbtgsm - 0
- 0
Modbus function 0x16 maskWriteRegister
#187 opened by gcdw64 - 8
Read negative values
#168 opened by thalesmaoa - 3
ReadHoldingRegisters takes 2seconds
#182 opened by JODLatGit - 0
Changing Slave ID
#183 opened by elektroboard - 5
Reading 32 bits number from two registers
#177 opened by Fluxanode - 1
Question about readWriteRegister example
#181 opened by Fluxanode - 1
hello i can write data but i can't read how can i read data can you help me
#165 opened by paxsipornax - 3
Share code example read/write multi slave ?
#159 opened by haidvams - 1
What (DE,RE) pins.
#155 opened by JLightMedia - 1
Read Holding Registers returns 266 (Error)
#170 opened by maharshi114 - 0
- 4
- 1
Support for multiple slaves on bus
#156 opened by danbujak - 6
[SOLVED] wrong data received
#150 opened by yuguifly - 0
- 3
- 2
Can Serial1 (Rx1 and Tx1) be used via a DUE to communicate over Modbus, or must it be Serial0 (Rx and Tx)?
#172 opened by ch992319 - 2
Modbus function 0x01 Read Coils is incorrect ?
#160 opened by haidvams - 0
Unable to communicate with Auber Instruments SYL-2381 Temperature Controller
#169 opened by chakahamilton - 3
Hi. Is it possible to edit communication parameters such as parity, stop bits and data length in ModbusMaster library (Version bump to v2.0.1)? Thank You.
#167 opened by pklg - 0
Bugs in Example "RS485_Halfduplex"
#166 opened by noiasca - 0
No value recieved - ModbusRTU_result = 226 - Modbus communication between ESP32 and a Frequency Inverter for a Motor
#164 opened by GregDavid123 - 1
- 0
help with modbus master, single register 8bit write
#162 opened by jaygrovr - 1
- 2
No Modbus slave station non-stop reset
#153 opened by bczhong - 13
- 0
- 0
Issues Reading registers in a separate function
#151 opened by yuguifly - 7
Retriving 0xE0 (Invalid Slave ID) Continious
#145 opened by nimish21 - 0
- 0
Unable to read a Modbus register from Elmeasure Meter using Arduino NodeMCU uint16_t _u16ResponseBuffer issue
#147 opened by pitchaimuthufb - 0
read and write holdingRegisters in only one request
#146 opened by ROG3R-DEV - 0
BUG REPORT: does not compile with -Werror=uninitialized due to bug in ModbusMaster::requestFrom(...)
#144 opened by dyarkovoy - 1
Last byte missing from master request
#142 opened by t6Jay - 0
Change duration
#140 opened by totza2010 - 0
- 2
How can I send a data by serial communication, using an Arduino to some program that will read this data?
#138 opened by Pedro0596 - 0