This is the official ArduPilot plugin for Gazebo.
It replaces the previous
ardupilot_gazebo
plugin and provides support for the recent releases of the Gazebo simulator
(Gazebo Garden) and (Gazebo Harmonic).
It also adds the following features:
- More flexible data exchange between SITL and Gazebo using JSON.
- Additional sensors supported.
- True simulation lockstepping. It is now possible to use GDB to stop the Gazebo time for debugging.
- Improved 3D rendering using the
ogre2
rendering engine.
The project comprises a Gazebo plugin to connect to ArduPilot SITL (Software In The Loop) and some example models and worlds.
Gazebo Garden or Harmonic is supported on Ubuntu 22.04 (Jammy).
If you are running Ubuntu as a virtual machine you will need at least
Ubuntu 20.04 in order to have the OpenGL support required for the
ogre2
render engine. Gazebo and ArduPilot SITL will also run on macOS
(Big Sur, Monterey and Venturua; Intel and M1 devices).
Follow the instructions for a binary install of Gazebo Garden or Gazebo Harmonic and verify that Gazebo is running correctly.
Set up an ArduPilot development environment. In the following it is assumed that you are able to run ArduPilot SITL using the MAVProxy GCS.
Install additional dependencies:
Gazebo Garden:
sudo apt update
sudo apt install libgz-sim7-dev rapidjson-dev
Or Gazebo Harmonic:
sudo apt update
sudo apt install libgz-sim8-dev rapidjson-dev
brew update
brew install rapidjson
Ensure the GZ_VERSION
environment variable is set to either
garden
or harmonic
.
Clone the repo and build:
git clone https://github.com/ArduPilot/ardupilot_gazebo
cd ardupilot_gazebo
mkdir build && cd build
cmake .. -DCMAKE_BUILD_TYPE=RelWithDebInfo
make -j4
Set the Gazebo environment variables in your .bashrc
or .zshrc
or in
the terminal used to run Gazebo.
Assuming that you have cloned the repository to $HOME/ardupilot_gazebo
:
export GZ_SIM_SYSTEM_PLUGIN_PATH=$HOME/ardupilot_gazebo/build:$GZ_SIM_SYSTEM_PLUGIN_PATH
export GZ_SIM_RESOURCE_PATH=$HOME/ardupilot_gazebo/models:$HOME/ardupilot_gazebo/worlds:$GZ_SIM_RESOURCE_PATH
Assuming that you have cloned the repository to $HOME/ardupilot_gazebo
:
echo 'export GZ_SIM_SYSTEM_PLUGIN_PATH=$HOME/ardupilot_gazebo/build:${GZ_SIM_SYSTEM_PLUGIN_PATH}' >> ~/.bashrc
echo 'export GZ_SIM_RESOURCE_PATH=$HOME/ardupilot_gazebo/models:$HOME/ardupilot_gazebo/worlds:${GZ_SIM_RESOURCE_PATH}' >> ~/.bashrc
Reload your terminal with source ~/.bashrc
(or source ~/.zshrc
on macOS).
gz sim -v4 -r iris_runway.sdf
The -v4
parameter is not mandatory, it shows additional information and is
useful for troubleshooting.
To run an ArduPilot simulation with Gazebo, the frame should have gazebo-
in it and have JSON
as model. Other commandline parameters are the same
as usual on SITL.
sim_vehicle.py -v ArduCopter -f gazebo-iris --model JSON --map --console
STABILIZE> mode guided
GUIDED> arm throttle
GUIDED> takeoff 5
The Zephyr delta wing is positioned on the runway for vertical take-off.
gz sim -v4 -r zephyr_runway.sdf
sim_vehicle.py -v ArduPlane -f gazebo-zephyr --model JSON --map --console
MANUAL> mode fbwa
FBWA> arm throttle
FBWA> rc 3 1800
FBWA> mode circle
The zephyr_runway.sdf
world has a <physics>
element configured to run
faster than real time:
<physics name="1ms" type="ignore">
<max_step_size>0.001</max_step_size>
<real_time_factor>-1.0</real_time_factor>
</physics>
To see the effect of the speed-up set the param SIM_SPEEDUP
to a value
greater than one:
MANUAL> param set SIM_SPEEDUP 10
In addition to the Iris and Zephyr models included here, a selection of models configured use the ArduPilot Gazebo plugin is available in ArduPilot/SITL_Models. Click on the images to see further details.
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
For issues concerning installing and running Gazebo on your platform please consult the Gazebo documentation for troubleshooting frequent issues.