Face Renderer

This page contains an improved version of the face renderer from the paper I. Masi*, A. Tran*, T. Hassner*, J. Leksut, G. Medioni, "Do We Really Need to Collect Million of Faces for Effective Face Recognition? ", in Proc. of ECCV 2016 [1].

This release is part of an on-going face recognition project [4]. Please, check this project page for updates and more data.

The code has been ported and extended from the re-implementation provided by Douglas Souza of the MATLAB frontalization code [3]

Features

Highly customizable through configuration file.
Highly portable few dependencies.
Render a face with the head and background.
The code uses pre-computed 3D projection. It is therefore as fast as interpolating a single image!
The code currently supports rendering of multiple poses {0°, 40°, 75°} and multiple 3D shapes [1...10]

Dependencies

The code has been tested on Linux only. On Linux you can rely on the default version of python, installing all the packages needed from the package manager or on Anaconda Python and install required packages through conda.

Importantly: OpenGL or other 3D rendering libraries are not required to run this code.

Usage

Run it

The renderer can be used from the command line in the following, different ways.

To run it directly on a single image (software will try to detected landmarks using the DLIB facial landmark detector):

$ python demo.py <image-path>

To run it on a single image with provided landmarks (landmarks are assumed to correspond to the 68 detected by DLIB):

$ python demo.py <image-path> <landmark-path>

The code can be executed even in batch on a list of files as follows:

$ python demo.py --batch <file-list-path>

where <file-list-path> is a csv file where each line contains the following:

<subj_key>,<image-path>,<landmark-path> (lines that contain # are skipped)

Example:

#key,img-path,land-path
iacopo_1,img/iacopo1.jpg,landmarks/iacopo1.pts
iacopo_2,img/iacopo2.jpg,landmarks/iacopo2.pts
iacopo_3,img/iacopo3.jpg,landmarks/iacopo3.pts

Given an image_key <subj_key> the code will create a folder with the subject name subj into its output folder. So the image_key must be something along the lines of subject_instance. If not, the code will use the entire key as a folder name.

You can run our demo with one of the following:

$ python demo.py input/input_1.jpg
$ python demo.py input/input_1.jpg input/input_1.pts
$ python demo.py --batch input/input.list

The result is saved in the provided output folder.

Customize it

The renderer reads the configuration file that is specified by a config.ini file.

The following options are available:

[general]
## Activate this to make rendered images suitable for ResNet-101
## for Face Recognition available here www.openu.ac.il/home/hassner/projects/augmented_faces/
## Note: This will automatically disable some of the other options specified here
## Moreover, you may have to code yourself in-plane alignment which is not provided here
resnetON = no

## Activate plotting
plotON = no

## Resize image to be fed into the CNN
resizeCNN = yes

## ConvNet imag size (used with resizeCNN)
cnnSize = 160

## Activate saving of rendered images
saveON = yes

## Number of total subjects for the 3D models 
nTotSub = 10

[renderer]
## Activate rendering of the background
background = yes 

## Activate soft-symmetry
symmetry = yes

## Parameters to get a bit far from the face when sampling the background
scaleFaceX = 0.5

## Activate Near View Rendering [2]
nearView = yes

## (used if symmetry is applied)
[symmetry]

## If we want to flip the background in symmetry or no
flipBackground = no

A few explanations on some not-so-obvious options:

resnetON if activated, set some parameters to produce rendered images that best fit ResNet101 for Face Recognition. Note you have still to code in-plane alignment by yourself. You can use the produced images with resnetON=yes as reference coordinate systems to do in-plane alignment.
nTotSub controls how many generic 3D shapes should be used to render the faces. If 10 is specified, all ten 3D generic shapes provide with this distribution are used. If 1, only the first generic shape is used, if 2, the first two are used, and so forth. Note that you need to edit the code if you want to render e.g. only subject 7.
background if yes the code will try to render the full background (head+background). Otherwise only the face region of the head is renderer and the background is left black.
scaleFaceX this parameter control how much you want to sample the background when you render a profile faces and the background falls outside of the image. Basically it controls the distance of the projected points on the X-axis to the face part; If you change this param, you can control this behavior.
nearView if activated, render a faces with a similar strategy of [2]: avoid frontalizing the faces which are near profile. Otherwise render faces to all poses {0,40,75}.
flipBackground Determines if the background is flipped or not when applying symmetry (you will filp the head and the background as well).

Sample Results

_{Respectively: Input image; then frontalization (0) with multi-shapes; render to (40) with multi-shapes; render to (75) with multi-shapes.}

Current Limitations

The renderer currently assumes reasonable landmark detector responses. It will fail if landmarks are not accurately localized. This is partly mitigated by rendering faces to a local pose and exploiting only one side of the face, similarly to [2].

Citation

Please cite our paper with the following bibtex if you use our face renderer:

@inproceedings{masi16dowe,
      title={Do {W}e {R}eally {N}eed to {C}ollect {M}illions of {F}aces 
      for {E}ffective {F}ace {R}ecognition?},
      booktitle = {European Conference on Computer Vision},
      author={Iacopo Masi 
      and Anh Tran 
      and Tal Hassner 
      and Jatuporn Toy Leksut 
      and G\'{e}rard Medioni},
      year={2016},
    }

References

[1] I. Masi*, A. Tran*, T. Hassner*, J. Leksut, G. Medioni, "Do We Really Need to Collect Million of Faces for Effective Face Recognition? ", ECCV 2016, * denotes equal authorship

[2] I. Masi, S. Rawls, G. Medioni, P. Natarajan "Pose-Aware Face Recognition in the Wild", CVPR 2016

[3] T. Hassner, S. Harel, E. Paz and R. Enbar "Effective Face Frontalization in Unconstrained Images", CVPR 2015

[4] Brendan F. Klare, Ben Klein, Emma Taborsky, Austin Blanton, Jordan Cheney, Kristen Allen, Patrick Grother, Alan Mah, Anil K. Jain, "Pushing the Frontiers of Unconstrained Face Detection and Recognition: IARPA Janus Benchmark A", CVPR 2015

Changelog

September 2016, First Release

Disclaimer

The SOFTWARE PACKAGE provided in this page is provided "as is", without any guarantee made as to its suitability or fitness for any particular use. It may contain bugs, so use of this tool is at your own risk. We take no responsibility for any damage of any sort that may unintentionally be caused through its use.

Contacts

If you have any questions, drop an email to iacopo.masi@usc.edu and hassner@isi.edu or leave a message below with GitHub (log-in is needed).

4F2E4A2E/face_specific_augm