5T33Z0/Gigabyte-Z490-Vision-G-Hackintosh-OpenCore
OpenCore EFI for running macOS Sequoia on Gigabyte Z490 Visison G with an Intel i9 10850K Processor. Supported macOS: Mojava to Sequoia
ASLBSD-3-Clause
Issues
- 0
AppleIGC kext won't load
#40 opened by mike-code - 8
Random wakes
#45 opened by azhinu - 5
System crashes randomly nearly every day.
#43 opened by mroncetwice - 1
Better sound Device Properties settings?
#42 opened by anzbanz - 2
- 1
Reset flashed EEPROM to use AppleIGC?
#39 opened by mkschulze - 9
Flashing a custom firmware onto the EEPROM of the Intel I225-V Ethernet Controller
#38 opened by verdazil - 2
You know this kext?
#37 opened by Terminalstrip - 1
- 2
d
#35 opened - 2
iGPU not recognised in Monterey
#12 opened by rursache - 3
CPU and Fan sensors issue
#5 opened by pentium0 - 1
- 3
Vectoworks Issue
#32 opened by petto10 - 4
Sleep Issues?
#31 opened by prabs77 - 4
USB Mapping
#30 opened by kuczynsky - 7
side Issue with intel wifi
#29 opened by vincerutabaga - 3
DRM Support
#26 opened by 0xCUB3 - 2
- 29
- 3
SDT-RX580
#21 opened by tommyw1979 - 6
PCIe Wifi Card (Fenvi T919) not recognised
#19 opened by MathieuUrstein - 1
Detect if you need to flash or not
#18 opened by vricosti - 1
Enable 4K Monitor
#16 opened by hmthang96 - 1
- 24
- 3
- 0
2.5gb issue?
#10 opened by hkfan45 - 1
Errors in Readme.md
#9 opened by ggctseng - 1
- 1
iGPU no success
#8 opened by liyawolf - 3
Dual Monitor using IGPU
#1 opened by Vermilion-INK - 2
- 1
USB C port
#2 opened by tommyw1979