Most of the time when you are using a public network, you are behind some kind of firewall or proxy. One of their purpose is to constrain you to only use certain kind of protocols. Nowadays, the most widespread protocol is http and is de facto allowed by third party equipment.
This tool understands this fact and uses the websocket protocol which is compatible with http in order to bypass firewalls and proxies. Wstunnel allows you to tunnel what ever traffic you want.
My inspiration came from this project but as I don't want to install npm and nodejs to use this tool, I remade it in Haskell and improved it.
What to expect:
- Good error messages and debug informations
- Static tunneling (TCP and UDP)
- Dynamic tunneling (socks5 proxy)
- Support for http proxy (when behind one)
- Support for tls/https server (with embedded self signed certificate, see comment in the example section)
- Support IPv6
- Standalone binary for linux x86_64 (so just cp it where you want)
- Standalone archive for windows
P.S: Please do not pay attention to Main.hs because as I hate to write command line code this file is crappy
Use the websockets protocol to tunnel {TCP,UDP} traffic
wsTunnelClient <---> wsTunnelServer <---> RemoteHost
Use secure connection (wss://) to bypass proxies
wstunnel [OPTIONS] ws[s]://wstunnelServer[:port]
Client options:
-L --localToRemote=[BIND:]PORT:HOST:PORT Listen on local and forwards
traffic from remote. Can be
used multiple time
-D --dynamicToRemote=[BIND:]PORT Listen on local and
dynamically (with socks5 proxy)
forwards traffic from remote
-u --udp forward UDP traffic instead
of TCP
--udpTimeoutSec=INT When using udp forwarding,
timeout in seconds after when
the tunnel connection is
closed. Default 30sec, -1 means
no timeout
-p --httpProxy=USER:PASS@HOST:PORT If set, will use this proxy
to connect to the server
--soMark=int (linux only) Mark network
packet with SO_MARK sockoption
with the specified value. You
need to use {root, sudo,
capabilities} to run wstunnel
when using this option
--upgradePathPrefix=String Use a specific prefix that
will show up in the http path
in the upgrade request. Useful
if you need to route requests
server side but don't have
vhosts
--hostHeader=String If set, add the custom string
as host http header
--tlsSNI=String If set, use custom string in
the SNI during TLS handshake
--websocketPingFrequencySec=int do a hearthbeat ping every x
seconds to maintain websocket
connection
--upgradeCredentials=USER[:PASS] Credentials for the Basic
HTTP authorization type sent
with the upgrade request.
-H --customHeaders="HeaderName: HeaderValue" Send custom headers in the
upgrade request. Can be used
multiple time
-h --help Display help message
-V --version Print version information
Server options:
--server Start a server that will
forward traffic for you
-r --restrictTo=HOST:PORT Accept traffic to be
forwarded only to this service
--tlsCertificate=FILE [optional] provide a custom
tls certificate (.crt) that the
server will use instead of the
embeded one
--tlsKey=FILE [optional] provide a custom
tls key (.key) that the server
will use instead of the embeded
one
Common options:
-v --verbose Print debug information
-q --quiet Print only errors
On your remote host, start the wstunnel's server by typing this command in your terminal
wstunnel --server ws://0.0.0.0:8080This will create a websocket server listening on any interface on port 8080. On the client side use this command to forward traffic through the websocket tunnel
wstunnel -D 8888 ws://myRemoteHost:8080This command will create a sock5 server listening on port 8888 of a loopback interface and will forward traffic.
With firefox you can setup a proxy using this tunnel, by setting in networking preferences 127.0.0.1:8888 and selecting socks5 proxy
or with curl
curl -x socks5h://127.0.0.1:8888 http://google.com/
#Please note h after the 5, it is to avoid curl resolving DNS name locallyYou can specify stdio as source port on the client side if you wish to use wstunnel as part of a proxy command for ssh
ssh -o ProxyCommand="wstunnel -L stdio:%h:%p ws://localhost:8080" my-server
An other useful example is when you want to bypass an http proxy (a corporate proxy for example) The most reliable way to do it is to use wstunnel as described below
Start your wstunnel server with tls activated
wstunnel --server wss://0.0.0.0:443 -r 127.0.0.1:22
The server will listen on any interface using port 443 (https) and restrict traffic to be forwarded only to the ssh daemon.
Be aware that the server will use self signed certificate with weak cryptographic algorithm. It was made in order to add the least possible overhead while still being compliant with tls.
Do not rely on wstunnel to protect your privacy, as it only forwards traffic that is already secure by design (ex: https)
Now on the client side start the client with
wstunnel -L 9999:127.0.0.1:22 -p mycorporateproxy:8080 wss://myRemoteHost:443
It will start a tcp server on port 9999 that will contact the corporate proxy, negotiate a tls connection with the remote host and forward traffic to the ssh daemon on the remote host.
You may now access your server from your local machine on ssh by using
ssh -p 9999 login@127.0.0.1
https://kirill888.github.io/notes/wireguard-via-websocket/
- If you see some throughput issue, be sure to lower the MTU of your wireguard interface (you can do it via config file) to something like 1300 or you will endup fragmenting udp packet (due to overhead of other layer) which is always causing issues
- If wstunnel cannot connect to server while wireguard is on, be sure you have added a static route via your main gateway for the ip of wstunnel server. Else if you forward all the traffic without putting a static route, you will endup looping your traffic wireguard interface -> wstunnel client -> wireguard interface
Install the stack tool https://docs.haskellstack.org/en/stable/README/ or if you are a believer
curl -sSL https://get.haskellstack.org/ | sh
and run those commands at the root of the project
stack init
stack install
- Add sock5 proxy
- Add better logging
- Add better error handling
- Add httpProxy authentification
- Add Reverse tunnel
- Add more tests for socks5 proxy