Configurations for my wierd and potentially complicated systemd-networkd setups
Server setup based on re-purposed Ryzen 5 1600x PC
- Intel i211 1000 Mbps, pci-e 2.0 x1, onboard
- Realtek rtl8125 2500 Mbps x4, pci-e 2.0 x4, pci-e AIC
- i211 and 1 of rtl8125's 4 ports bonded, connected to core switch as trunk, carrying vlan 7 and 17
- the remaining 3 of rtl8125's 4 ports and the above bond combined as a bridge, carrying vlan 7, 17 and 25
- 3 of the raw rtl8125 bridge slaves each connected to
- 1 to nuc, carrying vlan 7 and 25
- 1 to opi, carrying vlan 7 and 25
- 1 to pc, carrying vlan 7, 17 and 25
- 192.168.7.10 @ vlan7
- 192.168.17.2 @ vlan17
- 192.168.25.1 @ vlan25
SBC with RK3588S for native AArch64 builder and compilation works
- Rockchip 1000 Mbps MAC + YT8531 PHY, onboard
- Realtek rtl8152 2500Mbps, usb 3.0
- 1G port connected to core switch, no vlan
- 2.5G rtl8152 connected to rz5, carrying vlan 7 and 25
- 192.168.7.11 @ vlan7
- 192.168.7.251 @ vlan7
- 192.168.25.11 @ vlan25
SFF setup for lightweight workload
- Realtek rtl8111h 1000 Mbps, pci-e 1.1, onboard
- Realtek rtl8125 2500Mbps, pci-e 2.0 x1, m.2 a+e card
- 1G port connected to core switch, no vlan
- 2.5G rtl8152 connected to rz5, carrying vlan 7 and 25
- 192.168.7.12 @ vlan7
- 192.168.7.252 @ vlan7
- 192.168.25.12 @ vlan25