8cH9azbsFifZ/arduino_ft817

Issues

• getMode() and setMode() CW-N CWR-N

  #72 opened 12 years ago by berniemcintosh
  0

• Can't compile a basic sketch

  #71 opened 12 years ago by exidyboy
  3

• Loudness backside connector?

  #64 opened 12 years ago by 8cH9azbsFifZ
  0

• Minimal display

  #70 opened 12 years ago by 8cH9azbsFifZ
  0

• APRS on Arduino

  #23 opened 12 years ago by 8cH9azbsFifZ
  2

• Display antenna in use

  #56 opened 12 years ago by 8cH9azbsFifZ
  1

• Channel switch

  #69 opened 12 years ago by 8cH9azbsFifZ
  0

• Frequency Browsing: increment from bandwidth

  #68 opened 12 years ago by 8cH9azbsFifZ
  0

• Bandplan in flash, too

  #67 opened 12 years ago by 8cH9azbsFifZ
  0

• Implement mode switch

  #42 opened 12 years ago by 8cH9azbsFifZ
  1

• Hamlib Functions

  #46 opened 12 years ago by 8cH9azbsFifZ
  0

• Decode DCS tones

  #24 opened 12 years ago by 8cH9azbsFifZ
  0

• Decode CTCSS

  #25 opened 12 years ago by 8cH9azbsFifZ
  4

• CTCSS Encoding

  #26 opened 12 years ago by 8cH9azbsFifZ
  0

• Implement Frequency Browsing

  #44 opened 12 years ago by 8cH9azbsFifZ
  1

• Add rotary encoder for frequency

  #63 opened 12 years ago by 8cH9azbsFifZ
  1

• Browse Frequency using Rotary Encoder

  #66 opened 12 years ago by 8cH9azbsFifZ
  1

• Read Channels from SD Card

  #65 opened 12 years ago by 8cH9azbsFifZ
  1

• Show repeater position

  #60 opened 12 years ago by 8cH9azbsFifZ
  1

• Calculate distance to repeater

  #61 opened 12 years ago by 8cH9azbsFifZ
  1

• Implement Maidenhead to WGS

  #62 opened 12 years ago by 8cH9azbsFifZ
  1

• Create Hardware for GPS & Controls & SD

  #37 opened 12 years ago by 8cH9azbsFifZ
  3

• Display current band name

  #45 opened 12 years ago by 8cH9azbsFifZ
  2

• Checksums for GPS commands?

  #59 opened 12 years ago by 8cH9azbsFifZ
  0

• Code Review for Small Memory Footprint

  #50 opened 12 years ago by 8cH9azbsFifZ
  1

• Main Loop not working

  #51 opened 12 years ago by 8cH9azbsFifZ
  2

• GPS & Radio instable?

  #57 opened 12 years ago by 8cH9azbsFifZ
  2

• Use Mega ADK

  #58 opened 12 years ago by 8cH9azbsFifZ
  1

• Improve S Meter

  #55 opened 12 years ago by 8cH9azbsFifZ
  0

• Stream audio

  #54 opened 12 years ago by 8cH9azbsFifZ
  1

• display function not working

  #53 opened 12 years ago by 8cH9azbsFifZ
  1

• SoftwareSerial Bug?

  #47 opened 12 years ago by 8cH9azbsFifZ
  5

• Try timers

  #52 opened 12 years ago by 8cH9azbsFifZ
  1

• display_frequency_mode_smeter does not work

  #49 opened 12 years ago by 8cH9azbsFifZ
  1

• find_nearest_channel does not work

  #48 opened 12 years ago by 8cH9azbsFifZ
  3

• Adaptive repeater channels

  #29 opened 12 years ago by 8cH9azbsFifZ
  0

• Try out adafruit GPS

  #39 opened 12 years ago by 8cH9azbsFifZ
  2

• Update of display does not work at all times

  #43 opened 12 years ago by 8cH9azbsFifZ
  1

• Port to new display library

  #40 opened 12 years ago by 8cH9azbsFifZ
  1

• Flickering Display

  #41 opened 12 years ago by 8cH9azbsFifZ
  1

• Use Arduino Proto Shield

  #38 opened 12 years ago by 8cH9azbsFifZ
  2

• Startup channel detection

  #35 opened 12 years ago by 8cH9azbsFifZ
  1

• Setting Frequency of Channel may not work on 1st try

  #33 opened 12 years ago by 8cH9azbsFifZ
  1

• Set arbitraty repeater shift

  #34 opened 12 years ago by 8cH9azbsFifZ
  1

• Repeater offset

  #36 opened 12 years ago by 8cH9azbsFifZ
  2

• Repeater shift does not work on DB0VA

  #32 opened 12 years ago by 8cH9azbsFifZ
  2

• No Frequency Display

  #31 opened 12 years ago by 8cH9azbsFifZ
  1

• Measure Repeater Coverage

  #30 opened 12 years ago by 8cH9azbsFifZ
  0

• v0.5

  #28 opened 12 years ago by 8cH9azbsFifZ
  0

• v0.4

  #27 opened 12 years ago by 8cH9azbsFifZ
  1