Basic Call Recorder
BCR is a simple Android call recording app for rooted devices or devices running custom firmware. Once enabled, it stays out of the way and automatically records incoming and outgoing calls in the background.
Features
- Supports Android 9 through 13
- Supports compressed output in various formats:
- OGG/Opus - Lossy, smallest files, default on Android 10+
- M4A/AAC - Lossy, smaller files, default on Android 9
- FLAC - Lossless, larger files
- Records at the device's native sample rate
- Supports Android's Storage Access Framework (can record to SD cards, USB devices, etc.)
- Quick settings toggle
- Material You dynamic theming
- No persistent notification unless a recording is in progress
- No network access permission
- No third party dependencies
- Works with call screening on Pixel devices (records the caller, but not the automated system)
Non-features
As the name alludes, BCR intends to be a basic as possible. The project will have succeeded at its goal if the only updates it ever needs are for compatibility with new Android versions. Thus, many potentially useful features will never be implemented, such as:
- Automatic deletion of old recordings
- Changing the filename format
- Support for old Android versions (support is dropped as soon as maintenance becomes cumbersome)
- Workarounds for OEM-specific battery optimization and app killing behavior
- Workarounds for devices that don't support the
VOICE_CALL
audio source (eg. using microphone + speakerphone) - Support for direct boot mode (the state before the device is initially unlocked after reboot)
- Support for stock, unrooted firmware
Usage
-
Download the latest version from the releases page. To verify the digital signature, see the verifying digital signatures section.
-
Install BCR as a system app.
For devices rooted with Magisk, simply flash the zip as a Magisk module from within the Magisk app.
For unrooted custom firmware, the files from the
system/
folder in the zip will need to be baked into the system image (or otherwise made available on the actual/system
volume). -
Reboot and open BCR.
-
Enable call recording and pick an output directory. If no output directory is selected or if the output directory is no longer accessible, then recordings will be saved to
/sdcard/Android/data/com.chiller3.bcr/files
. -
To install future updates, there are a couple methods:
- If installed via Magisk, the module can be updated right from Magisk Manager's modules tab. Flashing the new version in Magisk manually also works just as well.
- The
.apk
can also be extracted from the zip and be directly installed. With this method, the old version exists as a system app and the new version exists as a user-installed update to the system app. This method is more convenient if BCR is baked into the Android firmware image.
How it works
BCR relies heavily on system app permissions in order to function properly. This is primarily because of two permissions:
-
CONTROL_INCALL_EXPERIENCE
This permission allows Android's telephony service to bind to BCR's
InCallService
without BCR being a wearable companion app, a car UI, or the default dialer. Once bound, the service will receive callbacks for call change events (eg. incoming call in the ringing state). This method is much more reliable than using theREAD_PHONE_STATE
permission and relying onandroid.intent.action.PHONE_STATE
broadcasts.This method has a couple additional benefits. Due to the way that the telephony service binds to BCR's
InCallService
, the service can bring itself in and out of the foreground as needed when a call is in progress and access the audio stream without hitting Android 12+'s background microphone access limitations. It also does not require the service to be manually started from anACTION_BOOT_COMPLETED
broadcast receiver and thus is not affected by that broadcast's delays during initial boot. -
CAPTURE_AUDIO_OUTPUT
This permission is used to record from the
VOICE_CALL
audio stream. This stream, along with some others, likeVOICE_DOWNLINK
andVOICE_UPLINK
, cannot be accessed without this system permission.
With these two permissions, BCR can reliably detect phone calls and record from the call's audio stream. The recording process pulls PCM s16le raw audio at the device's native sample rate and uses Android's built-in encoders to produce the compressed output file.
Verifying digital signatures
Both the zip file and the APK contained within are digitally signed.
To verify the signature of the zip file, first retrieve the public key: 2233C479609BDCEC43BE9232F6A3B19090EFF32C
. This is the same key used to sign the git tags in this repository.
gpg --recv-key 2233C479609BDCEC43BE9232F6A3B19090EFF32C
Then, verify the signature of the zip file.
gpg --verify BCR-<version>-release.zip.asc BCR-<version>-release.zip
The command output should include both Good signature
and the GPG fingerprint listed above.
To verify the signature of the APK, extract it from the zip and then run:
apksigner verify --print-certs system/priv-app/com.chiller3.bcr/app-release.apk
The SHA-256 digest of the APK signing certificate is:
d16f9b375df668c58ef4bb855eae959713d6d02e45f7f2c05ce2c27ae944f4f9
Building from source
BCR can be built like most other Android apps using Android Studio or the gradle command line.
To build the APK:
./gradlew assembleDebug
To build the Magisk module zip (which automatically runs the assembleDebug
task if needed):
./gradlew zipDebug
The output file is written to app/build/distributions/debug/
. The APK will be signed with the default autogenerated debug key.
To create a release build with a specific signing key, set up the following environment variables:
export RELEASE_KEYSTORE=/path/to/keystore.jks
export RELEASE_KEY_ALIAS=alias_name
read -r -s RELEASE_KEYSTORE_PASSPHRASE
read -r -s RELEASE_KEY_PASSPHRASE
export RELEASE_KEYSTORE_PASSPHRASE
export RELEASE_KEY_PASSPHRASE
and then build the release zip:
./gradlew zipRelease
Contributing
Bug fix and translation pull requests are welcome and much appreciated!
If you are interested in implementing a new feature and would like to see it included in BCR, please open an issue to discuss it first. I intend for BCR to be as simple and low-maintenance as possible, so I am not too inclined to add any new features, but I could be convinced otherwise.
License
BCR is licensed under GPLv3. Please see LICENSE
for the full license text.