/AIS_NB_BC95

AIS NB-IoT Arduino Library for DEVIO NB-SHIELD I and DEVIO NB-SHIELD I Plus

Primary LanguageC++

Library Version

AIS NB-IoT Library

AIS NB-IoT Library is designed to work with DEVIO NB-SHIELD I and DEVIO NB-SHIELD I Plus and connect to your own IoT Platform/Server. The library uses Software Serial for communication with the Arduino board.

For MEGA, connect GPIO8 to GPIO48 and GPIO09 to GPIO46.

Function List

General Functions

  • debug(<Boolean>): Prints log on Serial Monitor if True, otherwise no log will be printed.
  • setupDevice(<serverPort>): sets up the device.
  • getDeviceIP(): returns the IP as a string.
  • str2HexStr(< String data>): returns the string data as a hex string.
  • pingIP(serverIP): returns pingRESP with values addr, ttl, and rtt.

Send Data

  • sendUDPmsgStr(<serverIP>,< serverPort>,<udpData>): sends a string message with a maximum size of 512 bytes.
  • sendUDPmsg (<serverIP>,< serverPort>,<udpDataHEX>): sends a hex string message with a maximum size of 512 bytes.

Receive Data

  • waitResponse(): returns UDPReceive with values ip_address, port, length, data, and remaining_length.

Device Compatibility

DEVIO NB-SHIELD I | DEVIO NB-SHIELD I Plus

DEVIO NB-SHIELD I and DEVIO NB-SHIELD I Plus are extension boards for Arduino UNO R3 with a compatible pinout. For pinout information, please visit "www.ais.co.th/aiap" in the "IoT Dev Center" menu.

Specifications

  • Communication Module: Quectel BC95 / Quectel BC95-G
  • Network Technology: LTE Cat. NB1 (NB-IoT)
  • Frequency: Band 8 (900MHz)
  • Data Transmission: Single tone, downlink 24 kbps, uplink 15.625 kbps
  • Protocol Stack: UDP, CoAP
  • Serial Communication (UART): Hardware Serial RX on GPIO0 and TX on GPIO1; Software Serial RX on GPIO8 and TX on GPIO9.
  • Dimensions: 54 x 74 x 29 mm (width x length x height, excluding antenna)
  • Additional Features: NB-IoT Module Reset Button, Power Status LED.
  • NB-IoT Module Certification: NBTC, CE, CCC, SRRC, NAL, GCF

Getting Started

  1. Connect DEVIO NB-SHIELD I or DEVIO NB-SHIELD I Plus to your Arduino board.
  2. Code and compile using the Arduino Desktop IDE:
    • Install the Arduino board drivers.
    • Import the AIS NB-IoT Library from the Library Manager.
    • Open the AIS NB-IoT Example and specify your server IP and port.
    • Compile and upload the code.

สนใจสั่งซื้อ DEVIO NB-Shield I Plus ได้ที่ AIS online store หรือ AIS Playground
สอบถามข้อมูลเพิ่มเติม ติดต่อ DEVIO FB Fanpage