AJMansfield/TriacDimmer

Issues

• Correct For Drift Automatically in ISR

  #24 opened 7 months ago by AJMansfield
  0

• Unstable operation using the motor instead of the bulb

  #23 opened 7 months ago by DukesPL
  18

• Use with boards with >2 channels

  #22 opened 2 years ago by ivanzoid
  1

• Investigate waveform asymmetry.

  #18 opened 5 years ago by AJMansfield
  0

• Use with potentiometer?

  #20 opened 2 years ago by nsummy
  2

• Need to work with ESP32 Please Help ??

  #19 opened 4 years ago by suyashM6262
  1

• Support for more chips/boards.

  #17 opened 6 years ago by AJMansfield
  1

• Please, add STOP/RUN command on demand

  #7 opened 6 years ago by woodlist
  13

• doesn't work with Robotdyn AC Dimmer

  #11 opened 6 years ago by JAndrassy
  22

• Allow using only a single channel.

  #13 opened 6 years ago by AJMansfield
  8

• Pulse ends before triac becomes triggerable for very small phase offsets.

  #15 opened 6 years ago by AJMansfield
  0

• Output compare interrupts do not correctly configure clear on output compare.

  #12 opened 6 years ago by AJMansfield
  0

• external interrupt for zero crossing?

  #10 opened 6 years ago by JAndrassy
  8

• Warning in pin comparison

  #1 opened 8 years ago by AJMansfield
  0

• Please add the test circuit

  #6 opened 6 years ago by YordanYanakiev
  3