AKstudios
Architecture, software, engineering, embedded, IoT, graphic design, science, hacking and everything else.
AKstudiosChicago, IL
Pinned Repositories
ADS1115-auto-gain
This code automatically sets the gain of the ADS1115 16-bit ADC depending on the input voltage (between 0-5V).
BME680_Breakout
BORC
Battery-Operated Radiator Control
CCS811-Breakout
This is a breakout board for the CCS811 gas sensor
CCS811-library
This is a library for the CCS811 digital TVOC/eCO2 Sensor by CCMOSS/AMS
EAGLE-Libraries-by-AK
A collection of libraries created, modified or tweaked by AK
Moteino-MH-z19-Shield
MoteinoM0_mic_shield
PMSX003-Breakout
This is a breakout for the 8 pin connector for PMS5003/7003 PM2.5 sensor. All necessary pins are broken out
readSerial
Python script to read serial port on Raspberry Pi and write data to an SQLite database
AKstudios's Repositories
AKstudios/Potentiostat_VREF
AKstudios/Spec-Sensor-breakout
AKstudios/Adafruit_PowerBoost_500_Basic_3V5
A 3V5 (3V3+extra headroom) output version of the Adafruit PowerBoost
AKstudios/RFM69-Gateway-logger
AKstudios/COZIR-LP-Breakout
Breakout for COZIR-LP sensor
AKstudios/Moteino-IAQ-Shield
This is an air quality shield for Motenio that measures temperature, humidity, light intensity, PM2.5, CO2 and VOC concentrations.
AKstudios/PMSX003-Breakout
This is a breakout for the 8 pin connector for PMS5003/7003 PM2.5 sensor. All necessary pins are broken out
AKstudios/ADS1115-Breakout-5V
ADS1115 Breakout board for 0-5V input and 3.3V I2C level
AKstudios/PIR_datalogger
A motion/activity data logger that stores time-stamped data on a microSD card whenever there is motion within 3-5m. Approximate battery life: 1-2 years depending on LiPo battery used.
AKstudios/TRH_RFM69
This is a code for reading the SHT31 humidity sensor and US sensors thermistor (PR103J2) and sending data wirelessly using RFM69 radio. The thermistor is very accurate (±0.05°C) and has a wide range for indoor and outdoor temeprature measurements (-55°C ~ 80°C). The SHT31 sensor has a good accuracy of ±2% (can also be replaced by the more accurate SHT35 sensor). These sensors can be used for reference readings due to their accuracy.
AKstudios/K30_RFM69
This is a code for a wireless CO2 node based on the K-30 CO2 sensor. This sensor is accurate enough to be used for reference in indoor CO2 measurements
AKstudios/PocketLEDs
Just a small board that fades 3 LEDs running on a coin-cell battery.
AKstudios/Moteino-RTC-shield
DS3234 RTC Shield for Moteino.