TaxiDriver

Linux Kernel Module for RPM/WPM and usermode driver with examples.

Features

Get the base address of any process/loaded .so file
RPM
WPM

Compiling

Prerequises :

sudo pacman -S git linux-headers OpenGL cmake
yay -S sdl3-git

Upstream Linux Kernel

To compile the driver you'll need to be at least on kernel version v6.5 (i used the arch kernel).

legacy Linux Kernel

To build for an older Linux Kernel ex. 5.15 change KERNEL_UPSTREAM preprocessor definition in TaxiDriver.h: #define KERNEL_UPSTREAM 0 or if you use cmake only change required in CmakeLists.txt: add_compile_definitions(TaxiDriver PRIVATE KERNEL_UPSTREAM=0)

Compiling and running :

git clone --recursive https://github.com/ALittlePatate/TaxiDriver

Kernel Module

choose and write a MAJOR number ex. 506 in install.sh and validate for uniqueness grep "506" /proc/devices

# sudo mknod /dev/TaxiDriver c <choose Major Number> 0
# cmake is still incomplete
cd km && ./install.sh

system might still choose to set a different one, so read the number that is in use, after TaxiDriver is loaded, with grep "TaxiDriver" /proc/devices and adjust in mknod and reload TaxiDriver. After loading the Driver, you should find a line saying that TaxiDriver was loaded with X major code.

sudo dmesg | grep TaxiDriver

Unload the driver :

# sudo make unload
sudo rmmod TaxiDriver
sudo rm /dev/TaxiDriver

Usermode Target/Test Application

cd um/test && make
./test_app

Usermode Driver Application

cd um && make
./main

Known Issues

Fails to open device: MAJOR number has to match in mknod to open device! Check with grep "TaxiDriver" /proc/devices

If you find anything not listed above. Please open up Issues on the Repo and provide the build log showing the issue with LANG=C make with all of your steps and envoirment info to reproduce.

Missing Features in development

ImGui Overlay
expand km mem functions
expand um driver example and test_app
Findpattern
write/inject shellcode with asm mid function hook
X11 Input Event Handling

Contact

If you have a problem regarding the code, open an issue or make a pull request, i'll be happy to add your contribution !
If you need to contact me for any other reasons, message me at _.patate on discord.