ANYCUBIC-3D/Vyper

Issues

• Firmware v2.4.5 Bed Levelling

  #7 opened 3 years ago by 3DWolfdrive
  25

• Octoprint is not stopping if Vyper is out of filament

  #31 opened 8 months ago by volkerj70
  0

• Board file missing

  #2 opened 3 years ago by phiradd
  6

• Unable to resume print on "Pause at height" or "Filament Change"

  #16 opened 3 years ago by BlackBoxThe
  20

• Part fans always on. Doesn't reacting to gcode at all.

  #30 opened 2 years ago by istvanovics
  0

• VYPER NEEDS Marlin 2.1.1 Input Shaping

  #29 opened 2 years ago by Toddi3D
  0

• Update to current Marlin firmware

  #26 opened 2 years ago by Azathoth88
  1

• Minimum printing temperature

  #28 opened 2 years ago by Steelman14aUA
  0

• Octoprint is saying the firmware is using a development build

  #13 opened 3 years ago by bodyboarder2528
  2

• Preheat has no Cancel button?

  #22 opened 3 years ago by fordmaxson
  1

• Inverse Extruder Motor, can't compile

  #25 opened 3 years ago by whatwecee
  2

• PREHEAT TEMPERATURES

  #24 opened 3 years ago by Toddi3D
  0

• 2.3.5 & 2.4.5 Auto Bed Leveling doesn't work

  #8 opened 3 years ago by stuewe
  2

• Preheat Temp and Label cant be changed

  #23 opened 3 years ago by Toddi3D
  0

• No Fan Control until Today --- LoL Very Bad

  #21 opened 3 years ago by Toddi3D
  1

• I want to add WiFi to the printer？

  #15 opened 3 years ago by chinamummy
  4

• missing firmware_release.exe tool

  #20 opened 3 years ago by denisgosa
  1

• Feature Request: Larger moves in "Move Axis" menu

  #19 opened 3 years ago by jens-duttke
  0

• M900 Linear advance factor cannot be set

  #18 opened 3 years ago by igrowing
  0

• Massive Stuttering when printing via USB / UART

  #17 opened 3 years ago by wilhelmzeuschner
  1

• An image is broken in the wiki

  #11 opened 3 years ago by ismailarilik
  0

• The most important thing is to insert the POD DISPLAY card !!! that was the problemHi, I´ve got the same problem.

  #12 opened 3 years ago by rom119
  2

• I tried to compile the source and it fails saying the board type is wrong.

  #14 opened 3 years ago by midicdj1000
  2

• configuration of TMC2209 drivers missing

  #1 opened 3 years ago by FotoFieber
  5

• Tool for erasing eeprom is missed

  #3 opened 3 years ago by Semmi121
  5

• Screen Features

  #9 opened 3 years ago by tmitch205
  2

• Firmware 2.3.9: when I click on "Home All" button of the "Move Axis" page, "Home All" button flickers for the full tome that the nozzle moves back to home

  #6 opened 3 years ago by sanangeles84
  7

• 0.5 vs 0.6

  #5 opened 3 years ago by mvoss96
  1

• Schematics and additional Information

  #4 opened 3 years ago by mneuhaus
  1