ARM-software/sbsa-acs

Issues

• Test 840 (PCIe RC,PE - Same Inr Shareable Domain) should run at levels higher than 7 rather than level 3

  #469 opened a month ago by sunnywang-arm
  1

• Duplicate test case 302 in testcase checklist

  #468 opened a month ago by anncheng-arm
  2

• Test 23 does not accept CSV2_3

  #461 opened 3 months ago by hrw
  0

• Drop PCIe tests

  #460 opened 3 months ago by hrw
  2

• PE Test 16 (Check MPAM LLC Requirements) doesn't support the case where ACPI MAPM's MSCs are PCC based

  #454 opened 4 months ago by sunnywang-arm
  2

• Since when Cortex-A57 has pointer authentication?

  #455 opened 4 months ago by hrw
  1

• PE Test 16 checks wrong offset in Descriptor1 of locator in ACPI MPAM table

  #450 opened 4 months ago by sunnywang-arm
  0

• WORKSPACE can point to any place

  #446 opened 4 months ago by hrw
  6

• PCIe Test 025 : The Enable No Snoop Bit(bit11) value and attribute is incorrect

  #437 opened 5 months ago by jumpmanhou
  4

• Features not supported causes test item to fail

  #439 opened 5 months ago by hysen0523
  3

• Port "-el1physkip" from BSA-ACS

  #434 opened 6 months ago by samerhaj
  0

• ACS Linux failed to mount result partition

  #429 opened 7 months ago by foxmmmm
  1

• Wakeup timer interrupt usage issue

  #418 opened 7 months ago by hensonwang
  11

• Why PE test 16 (rule S_MPAM_PE) limits the resource tpye to PE cache only?

  #388 opened 7 months ago by StevenHuang0117
  11

• Enhancement to val_pcie_mem_get_offset

  #409 opened 8 months ago by robbiek-xsl
  2

• SBSATimer use interrupt issue

  #408 opened 9 months ago by hensonwang
  16

• PE test 16 (rule S_MPAM_PE) could be more verbose on failure

  #384 opened a year ago by paulzzy
  1

• Add an option to run only selected tests

  #381 opened a year ago by hrw
  1

• test 861: Received exception of type: 0

  #327 opened a year ago by hrw
  17

• Rename test 314?

  #375 opened a year ago by hrw
  2

• Tests 828/829 (PCIe Power management ones) need better message?

  #373 opened a year ago by hrw
  3

• Rename test 309?

  #374 opened a year ago by hrw
  1

• Exerciser Sbsa compliance is only from Level 4

  #320 opened a year ago by hrw
  2

• Secondary core cannot get test function vector in val_test_entry

  #348 opened a year ago by foxmmmm
  2

• Test 16 (Check MPAM LLC Requirements) should check MPAM before PPTT LLC

  #349 opened a year ago by sunnywang-arm
  2

• SBSA Linux failure - 406: No extra addr translation - SMMU

  #276 opened a year ago by sunnywang-arm
  1

• Skip module header on skipped module?

  #333 opened a year ago by hrw
  1

• let test 803 ignore legacy PCI cards?

  #339 opened a year ago by hrw
  1

• Rename test 30 to be more precise?

  #329 opened a year ago by hrw
  1

• Rename test 315?

  #334 opened a year ago by hrw
  0

• PCIe tests are not skippable

  #328 opened a year ago by hrw
  2

• test 301 lacks S_L4SM_01 and S_L5SM_01 rules

  #308 opened a year ago by hrw
  3

• Use granular commits?

  #326 opened a year ago by hrw
  5

• The message from SBSA test "3 : Check AARCH64 implementation" is not enough

  #292 opened 2 years ago by sunnywang-arm
  2

• Test 861 uses S_PCI_02 tag which is not in SBSA spec

  #317 opened a year ago by hrw
  4

• S_L4PCI_2 is tested only on SBSA level 6+

  #297 opened a year ago by hrw
  3

• Synchronize level checks?

  #307 opened a year ago by hrw
  3

• Test 301 has badly formatted output on failure

  #316 opened a year ago by hrw
  1

• "Should support" does not sounds properly

  #309 opened a year ago by hrw
  0

• PE Test015-"Check MPAM PE Requirements" Need judg Nerverse N2 version.

  #302 opened a year ago by JackWeihuadi
  2

• S_L3SM_01 is not tested on level 3

  #299 opened a year ago by hrw
  3

• test 457 lacks SBSA reference

  #296 opened a year ago by hrw
  2

• SBSA test "1301 : Check peripherals addr 64Kb apart" issues

  #293 opened 2 years ago by sunnywang-arm
  3

• MPAM (PE test 15) should fail on level 7

  #290 opened 2 years ago by hrw
  2

• Error: unknown or missing system register name at operand 2 -- `mrs x0,mpam1_el1'

  #289 opened 2 years ago by hrw
  1

• sbsa-acs-master\val\src\avs_pe.c : In "val_pe_reg_read "undefined reference to few functions (ArmReadMpidr)

  #273 opened 2 years ago by sekharg1995
  5

• SBSA Linux Test 407 should not check the RCiEP that doesn't support interrupt

  #278 opened 2 years ago by sunnywang-arm
  1

• Test 441 should not check the RCiEP that doesn't support interrupt

  #270 opened 2 years ago by sunnywang-arm
  1

• SBSA PE tests do not execute successfully on aarch64 machines due to secondary stack alignment issue

  #262 opened 2 years ago by r0bwoo
  5

• PSCI conduit is assumed to be SMC

  #263 opened 2 years ago by darkwood101
  2