Issues
- 3
[miro:bit] [0258] PWR led turns sometimes off when device is powered by battery on reset button press
#1071 opened by fabianhugo - 1
Clarification on flash blobs
#1073 opened by vincent290587 - 1
CPU Can't stop
#1072 opened by ssyqwer - 0
Some questions about "MSD Commands"
#1070 opened by PYL4869 - 1
Support for probe interface level translation
#1069 opened by mjakovlevs - 1
Why is it that after I dragged and burned the daplink firmware in bootloader mode, it succeeded, but when I disconnected and reconnected, it changed to bootloader mode.
#1065 opened by LONG300002 - 4
- 28
- 0
The latest version of Keil5 always prompts "swd/jtag communication failure" when using DAPLink
#1066 opened by weiweidianz - 2
ROM USB loader of the LPC11u35
#1024 opened by suikan4github - 1
DAPLink worked in IAR,but not work in KEIL MDK.
#1062 opened by LaoChang2012 - 2
DAPLink doesn't work with IAR EWARM 8.3?
#1050 opened by zhyjason - 2
build error not have version_git.h
#1063 opened by Berte-Yu - 0
"EraseChip" doesn't seem quite right
#1061 opened by TianpeiLee - 14
Flashing errors with recent Windows update
#1025 opened by microbit-carlos - 31
- 8
Can nRF52820 HIC firmware be used for nRF52840?
#1009 opened by dojyorin - 0
Unsigned int comparison to 0
#1051 opened by b4yuan - 0
PIO0_14 as JTAG TDO
#1047 opened by vgegok - 0
- 4
GNU Arm Embedded Toolchain is deprecated
#1034 opened by terrancewong - 2
- 0
- 0
uart.c constant comparison issues
#1039 opened by b4yuan - 1
Probe Error
#1029 opened by gismo4 - 4
Not able to build in windows gcc environment
#1033 opened by svsramaraju - 1
- 3
An error is reported after the “progen generate -t uvision” command is executed
#1028 opened by 15230745073 - 1
DAP response queue filling up, starving interface
#1026 opened by fughilli - 0
- 2
- 1
things about unexpected behaviour in MSC transfer flow
#1013 opened by ruiminw - 6
Hex code check.
#983 opened by fabio-ric-silva - 0
How to use BULK transfer with the v0257?
#1011 opened by zhyjason - 0
Remove RTX4/CMSIS-RTOS1
#1007 opened by mbrossard - 4
- 8
LPC11U35/401 support (OKdo E1)
#989 opened by sszczep - 1
- 0
Issues in `source/daplink/drag-n-drop/iap_flash_intf.c`
#1006 opened by mbrossard - 2
- 2
ld error when compiled with make_gcc_arm
#1003 opened by IOsetting - 2
- 2
Problem with microbitv2 and DAPlink v0257
#997 opened by stm32wrobotyce - 2
swd_read_block() / swd_write_block() misalignment
#996 opened by rgrr - 1
JTAG2SWD() should be hookable
#992 opened by rgrr - 0
board_info.swd_set_target_reset() never used
#995 opened by rgrr - 1
nucleo enters maintenence mode by default
#990 opened by johannesneyer - 3
stm32f103xb stuck at bootloader
#988 opened by luckyxiaoer - 1
MCU-LINK doesn't have MSD
#985 opened by mdkf - 2