ARMmbed/mbed-ls

Issues

• JLink Windows device detection no longer works properly

  #385 opened 6 years ago by cmonr
  8

• two results has same serial_port

  #366 opened 6 years ago by jupe
  4

• "0224" not added in platform database

  #412 opened 6 years ago by Hoohaha
  4

• It is not good to list all jlink opensda device

  #413 opened 6 years ago by Hoohaha
  4

• NRF51_DK incorrect detection on Windows 10 x64

  #337 opened 6 years ago by andrewleech
  8

• Can't detect target with JLink 8.0

  #360 opened 6 years ago by OmerRosler
  2

• adding non-development-board target

  #414 opened 6 years ago by geoffrey-vl
  5

• mbedls 1.4.6 hangs on macOS 10.13.5 Python3.6

  #359 opened 6 years ago by cederom
  6

• API to get supported platforms names

  #365 opened 6 years ago by jupe
  0

• Warning for incorrect MBED.HTM format says it can't read the file

  #252 opened 6 years ago by theotherjimmy
  8

• How to distinguish between two MCUs with same DAPLink firmware

  #388 opened 6 years ago by janjongboom
  9

• Add instructions on how to add new devices/targets/families to mbed-ls

  #382 opened 6 years ago by cmonr
  1

• device_type is null with version 1.5.0

  #376 opened 6 years ago by juhhov
  6

• mbedls-1.4.6 assigns same target id for separate devices

  #363 opened 6 years ago by paviitan
  5

• mbed detect: No mbed targets were detected

  #327 opened 7 years ago by Soheilica
  6

• Update setup.py maintenance info

  #343 opened 7 years ago by bridadan
  2

• No support for Scilab EFM32 Pearl Gecko boards since 1.4

  #355 opened 7 years ago by EmbedEngineer
  3

• Indicating about ASSERT.TXT

  #336 opened 7 years ago by jupe
  4

• boards without mbed.htm is not detected anymore

  #352 opened 7 years ago by jupe
  2

• mbedls v1.4.3 doesn't detect connected targets

  #332 opened 7 years ago by toyowata
  3

• Unmounted NRF52_DK shows error when `-u` is passed

  #325 opened 7 years ago by drahnr
  1

• WindowsError raised when reading the registry

  #322 opened 7 years ago by bridadan
  0

• list_mbeds() raises WindowsError [Error 21] The device is not ready: 'H:*.*'

  #319 opened 7 years ago by jupe
  2

• Targets not detected on Windows 7

  #264 opened 7 years ago by MarceloSalazar
  3

• Platform database not updated on pip install

  #232 opened 7 years ago by theotherjimmy
  2

• Readme section Extended mbedls API example section outdated

  #275 opened 7 years ago by maclobdell
  1

• mbedls detects board that is not there

  #279 opened 7 years ago by cederom
  10

• Detect boards with JLink firmware

  #283 opened 7 years ago by sg-
  13

• No logging configuration if create used

  #302 opened 7 years ago by jonikula
  12

• deprecated messages to remove

  #267 opened 7 years ago by jeromecoutant
  2

• cannot filter based on details.txt fields

  #288 opened 7 years ago by jupe
  0

• Logging uses root logger

  #285 opened 7 years ago by jonikula
  4

• `get_mbed_com_port` API is missing

  #277 opened 7 years ago by jupe
  10

• Error from creating ~/.local/share/mbedls/platforms.json is ignored

  #270 opened 7 years ago by RomanSaveljev
  7

• Traceback occurs when ran with factory default firmware on Realtek RTL8195AM

  #276 opened 7 years ago by bridadan
  2

• Retargeting with mbedls.json causes a NameError exception

  #268 opened 7 years ago by hug-dev
  1

• left align mbed-ls output

  #261 opened 7 years ago by studavekar
  2

• mbedls v1.3.3 requires admin rights on Window 7

  #263 opened 7 years ago by toyowata
  1

• mbedls v1.3.2 (and onward) is broken on Windows 7 and 10

  #259 opened 7 years ago by toyowata
  4

• 1.3.2 breaks windows python 3.6.2 supports

  #244 opened 7 years ago by YifeiZuo01
  8

• 1.3.2 throws at launch, when installed in ArchLinux

  #246 opened 7 years ago by RomanSaveljev
  1

• Package version does not match released version

  #236 opened 7 years ago by bridadan
  1

• Root logger used occasoinally

  #234 opened 7 years ago by theotherjimmy
  1

• Tests do not run on Windows

  #238 opened 7 years ago by bridadan
  2

• DAPLink devices in bootloader mode are no longer detected

  #235 opened 7 years ago by c1728p9
  2

• No CI for Darwin

  #230 opened 7 years ago by theotherjimmy
  0

• Windows python 3 install failed

  #226 opened 7 years ago by YifeiZuo01
  6

• Missing platforms in platform_database.py

  #222 opened 7 years ago by maclobdell
  1

• Go back and investigate strange COM port discovery in windows implementation

  #218 opened 7 years ago by bridadan
  1

• 1.2.15 release break the compatibility with mbed-flasher py3 support

  #204 opened 7 years ago by YifeiZuo01
  1