ASFHyP3/hyp3-gamma

Issues

• InSAR fails with `range position of phase reference point outside of image segment` during phase unwrapping

  #583 opened 6 months ago by asjohnston-asf
  1

• InSAR fails with `no offsets found above correlation coefficient threshold` for scenes over water

  #561 opened 7 months ago by asjohnston-asf
  0

• `create_water_mask` fails with `TIFFReadEncodedTile() failed` during InSAR processing

  #557 opened 8 months ago by asjohnston-asf
  3

• INSAR_GAMMA jobs near the south pole fail due to missing water mask tiles

  #553 opened 10 months ago by asjohnston-asf
  0

• Fix inconsistent logging output

  #534 opened a year ago by jtherrmann
  1

• `shapely.errors.TopologicalError` during InSAR water masking

  #528 opened a year ago by cirrusasf
  0

• Incorrect Conversion from Shapefile to Water Mask Raster

  #507 opened a year ago by AndrewPlayer3
  0

• Invalid interferograms over Armenia and Azerbaijan

  #462 opened a year ago by asjohnston-asf
  4

• `util.unzip_granule` fails with `StopIteration` for Sentinel-1 scenes acquired since 2023-09-26

  #491 opened a year ago by asjohnston-asf
  7

• INSAR_GAMMA job with 10x2 looks fails with OutOfMemoryError after GAMMA 20210701 upgrade

  #316 opened a year ago by asjohnston-asf
  6

• The lv_phi xml file in the INSAR productlv_phi gives a smaller data range

  #478 opened a year ago by cirrusasf
  0

• Is the interferogram filtered in the downloaded file?

  #463 opened a year ago by ZGHHGZ
  1

• I'm looking forward to adding looks="5x1" in submit_insar_job()

  #461 opened a year ago by ZGHHGZ
  1

• gdal 3.4.* is incompatible with update libxml2 requirements

  #421 opened 2 years ago by jacquelynsmale
  1

• the impact of window size on the choice of the reference point in the InSAR calculation

  #387 opened 2 years ago by cirrusasf
  1

• Output DEM included with RTC/InSAR products potentially has invalid data in areas where DEM data was not needed for processing

  #260 opened 4 years ago by asjohnston-asf
  3

• Incorrect map coordinates reported for phase unwrapping reference point

  #380 opened 2 years ago by asjohnston-asf
  0

• Error in execute.py

  #361 opened 3 years ago by Arctic-Ambrun
  1

• rtc_sentinel.py fails with `Unable to open datasource` when provided absolute path to SAFE directory

  #332 opened 3 years ago by asjohnston-asf
  0

• ifm_sentinal.py always picks the older file as reference, and newer file as secondary.

  #269 opened 4 years ago by cirrusasf
  4

• Bring in Geocode Only xmls / metadata from science repo

  #320 opened 4 years ago by jhkennedy
  0

• 10m RTC fails with segmentation fault (core dumped)

  #311 opened 3 years ago by jhkennedy
  0

• Heading attribute of InSAR products expressed clockwise instead of counter-clockwise for descending scenes

  #306 opened 3 years ago by asjohnston-asf
  4

• NoData values for output products potentially mask valid data values

  #266 opened 4 years ago by asjohnston-asf
  1

• Sort out DEM resampling for InSAR

  #254 opened 4 years ago by talogan
  0

• InSAR fails with "no points available for determining average intensity" error

  #216 opened 4 years ago by asjohnston-asf
  0

• RTC - only one mk_geo_radcal2 mode 3 log captured

  #197 opened 4 years ago by asjohnston-asf
  0

• Merge getDemFileGamma and hyp3lib.getDemFile

  #193 opened 4 years ago by asjohnston-asf
  1

• rtc_sentinel.py fails when the --nocrosspol option is enabled

  #179 opened 4 years ago by asjohnston-asf
  0

• Requesting formal support for use of the IFSAR DEM

  #183 opened 4 years ago by washreve
  0

• upload_folder_to_s3() improvements

  #99 opened 4 years ago by asjohnston-asf
  1

• v2 helper function is __main__.py should move to hyp3-lib

  #98 opened 4 years ago by asjohnston-asf
  1

• cogify_dir API changed in hyp3lib > v1.2.3

  #113 opened 4 years ago by jhkennedy
  1