Ruckig calculates a time-optimal trajectory to a target waypoint with position, velocity, and acceleration starting from any initial state limited by velocity, acceleration, and jerk constraints. Ruckig is a more powerful and open-source alternative to the Reflexxes Type IV library. In fact, Ruckig is the first Type V trajectory generator for arbitrary target states and even supports directional velocity and acceleration limits, while also being faster on top. For robotics and machining applications, Ruckig allows both instant reactions to unforeseen events as well as simple offline trajectory planning.
More information can be found in the corresponding paper Jerk-limited Real-time Trajectory Generation with Arbitrary Target States, accepted for the Robotics: Science and Systems (RSS), 2021 conference.
Ruckig has no dependencies (except for testing). To build Ruckig using CMake, just run
mkdir -p build
cd build
cmake -DCMAKE_BUILD_TYPE=Release ..
makeTo install Ruckig in a system-wide directory, use (sudo) make install. An example of using Ruckig in your CMake project is given by examples/CMakeLists.txt. However, you can also include Ruckig as a directory within your project and call add_subdirectory(ruckig) in your parent CMakeLists.txt.
Ruckig is also available as a Python module, in particular for development or debugging purposes. It can be installed from PyPI via
pip install ruckigWhen using CMake, the Python module can be built using the BUILD_PYTHON_MODULE flag. If you're only interested in the Python module (and not in the C++ library), you can build and install Ruckig via pip install ..
Furthermore, we will explain the basics to get started with online generated trajectories within your application. Some working examples can be found in the examples directory, for example position.cpp for C++. A time-optimal trajectory for a single degree of freedom is shown in the figure below.
Ruckig provides three main interface classes: the Ruckig, the InputParameter, and the OutputParameter class.
First, you'll need to create a Ruckig instance with the number of DoFs as a template parameter, and the control cycle (e.g. in seconds) in the constructor.
Ruckig<6> ruckig {0.001}; // Number DoFs; control cycle in [s]The input type has 3 blocks of data: the current state, the target state and the corresponding kinematic limits.
InputParameter<6> input; // Number DoFs
input.current_position = {0.2, ...};
input.current_velocity = {0.1, ...};
input.current_acceleration = {0.1, ...};
input.target_position = {0.5, ...};
input.target_velocity = {-0.1, ...};
input.target_acceleration = {0.2, ...};
input.max_velocity = {0.4, ...};
input.max_acceleration = {1.0, ...};
input.max_jerk = {4.0, ...};
OutputParameter<6> output; // Number DoFsGiven all input and output resources, we can iterate over the trajectory at each discrete time step. For most applications, this loop must run within a real-time thread and controls the actual hardware.
while (ruckig.update(input, output) == Result::Working) {
// Make use of the new state here!
input.current_position = output.new_position;
input.current_velocity = output.new_velocity;
input.current_acceleration = output.new_acceleration;
}During the update step, you'll need to copy the new kinematic state into the current state. If the current state is not the expected, pre-calculated trajectory, ruckig will calculate a new trajectory with the novel input. When the trajectory has reached the target state, the update function will return Result::Finished.
To go into more detail, the InputParameter type has following members:
using Vector = std::array<double, DOFs>; // By default
Vector current_position;
Vector current_velocity; // Initialized to zero
Vector current_acceleration; // Initialized to zero
Vector target_position;
Vector target_velocity; // Initialized to zero
Vector target_acceleration; // Initialized to zero
Vector max_velocity;
Vector max_acceleration;
Vector max_jerk;
std::optional<Vector> min_velocity; // If not given, the negative maximum velocity will be used.
std::optional<Vector> min_acceleration; // If not given, the negative maximum acceleration will be used.
std::array<bool, DOFs> enabled; // Initialized to true
std::optional<double> minimum_duration;
ControlInterface control_interface; // The default position interface controls the full kinematic state.
Synchronization synchronization; // Synchronization behavior of multiple DoFs
DurationDiscretization duration_discretization; // Whether the duration should be a discrete multiple of the control cycle (off by default)On top of the current state, target state, and constraints, Ruckig allows for a few more advanced settings:
- A minimum velocity and acceleration can be specified - these should be a negative number. If they are not given, the negative maximum velocity or acceleration will be used (similar to the jerk limit). For example, this might be useful in human robot collaboration settings with a different velocity limit towards a human. Or, when switching between different moving coordinate frames like picking from a conveyer belt.
- If a DoF is not enabled, it will be ignored in the calculation. Ruckig will output a trajectory with constant acceleration for those DoFs.
- A minimum duration can be optionally given. Note that Ruckig can not guarantee an exact, but only a minimum duration of the trajectory.
- The control interface (position or velocity control) can be switched easily. For example, a stop trajectory or visual servoing can be easily implemented with the velocity interface.
- Different synchronization behaviors (i.a. phase, time, or no synchonization) are implemented.
- The trajectory duration might be constrained to a multiple of the control cycle. This way, the exact state can be reached at a control loop execution.
We refer to the API documentation of the enumerations within the ruckig namespace for all available options.
Note that there are range constraints of the input due to numerical reasons, see below for more details. To check the input before a calculation step,
ruckig.validate_input(input); // returns booleanreturns false if an input is not valid. Of course, the target state needs to be within the given kinematic limits. Additionally, the target acceleration needs to fulfil
Abs(target_acceleration) <= Sqrt(2 * max_jerk * (max_velocity - Abs(target_velocity)))
The update function of the Ruckig class returns a Result type that indicates the current state of the algorithm. This can either be working, finished if the trajectory has finished, or an error type if something went wrong during calculation. The result type can be compared as a standard integer.
| State | Error Code |
|---|---|
| Working | 0 |
| Finished | 1 |
| Error | -1 |
| ErrorInvalidInput | -100 |
| ErrorTrajectoryDuration | -101 |
| ErrorExecutionTimeCalculation | -110 |
| ErrorSynchronizationCalculation | -111 |
The output class includes the new kinematic state and the overall trajectory.
Vector new_position;
Vector new_velocity;
Vector new_acceleration;
bool new_calculation; // Whether a new calculation was performed in the last cycle
double calculation_duration; // Duration of the calculation in the last cycle [µs]
Trajectory trajectory; // The current trajectory
double time; // The current, auto-incremented time. Reset to 0 at a new calculation.Moreover, the trajectory class has a range of useful parameters and methods.
double duration; // Duration of the trajectory
std::array<double, DOFs> independent_min_durations; // Time-optimal profile for each independent DoF
<...> at_time(double time); // Get the kinematic state of the trajectory at a given time
<...> get_position_extrema(); // Returns information about the position extrema and their timesAgain, we refer to the API documentation for the exact signatures.
So far, we have told Ruckig the number of DoFs as a template parameter. If you don't know the number of DoFs at compile-time, you can set the template parameter to DynamicDOFs and pass the DoFs to the constructor:
Ruckig<DynamicDOFs> otg {6, 0.001};
InputParameter<DynamicDOFs> input {6};
OutputParameter<DynamicDOFs> output {6};However, we recommend to keep the template parameter when possible: First, it has a performance benefit of a few percent. Second, it is convenient for real-time programming due to its easier handling of memory allocations. When using dynamic degrees of freedom, make sure to allocate the memory of all vectors beforehand.
Ruckig also supports an offline approach for calculating a trajectory:
result = ruckig.calculate(input, trajectory);When only using this method, the Ruckig constructor does not need a control cycle as an argument.
The current test suite validates over 5.000.000.000 random trajectories. The numerical exactness is tested for the final position and final velocity to be within 1e-8, for the final acceleration to be within 1e-10, and for the velocity, acceleration and jerk limit to be within of a numerical error of 1e-12. These are absolute values - we suggest to scale your input so that these correspond to your required precision of the system. For example, for most real-world systems we suggest to use input values in [m] (instead of e.g. [mm]), as 1e-8m is sufficient precise for practical trajectory generation. Furthermore, all kinematic limits should be below 1e12. The maximal supported trajectory duration is 7e3, which again should suffice for most applications seeking for time-optimality. Note that Ruckig will also output values outside of this range, there is however no guarantee for correctness.
We find that Ruckig is more than twice as fast as Reflexxes Type IV and well-suited for control cycles as low as half a millisecond.
Ruckig is written in C++17. It is continuously tested on ubuntu-latest, macos-latest, and windows-latest against following versions
- Doctest v2.4 (only for testing)
- Pybind11 v2.6 (only for python wrapper)
If you still need to use C++11, you can patch Ruckig by calling sh patch-c++11.sh. Note that this will result in a performance drop of a few percent. Moreover, the Python module is not supported.
Ruckig is used by:
- CoppeliaSim in their upcoming release.
- MoveIt 2 for trajectory smoothing.
- Struckig, a port of Ruckig to Restructered Text for usage on PLCs.
- Frankx for controlling the Franka Emika robot arm.
- and others!
@article{berscheid2021jerk,
title={Jerk-limited Real-time Trajectory Generation with Arbitrary Target States},
author={Berscheid, Lars and Kr{\"o}ger, Torsten},
journal={Robotics: Science and Systems XVII},
year={2021}
}