- Wide hardware support (both through SoapySDR and dedicated modules)
- SIMD accelerated DSP
- Cross-platform (Windows, Linux, OSX and BSD)
- Full waterfall update when possible. Makes browsing signals easier and more pleasant
- Digital demodulators and decoders
- Light theme (I know you weirdos exist lol)
- Waterfall color scheme editor
- Switchable fft size
- other small customisation options
Download the latest release from the Releases page and extract to the directory of your choice.
To create a desktop short, rightclick the exe and select Send to -> Desktop (create shortcut), then, rename the shortcut on the desktop to whatever you want.
Download the latest release from the Releases page and extract to the directory of your choice.
Then, run:
sudo apt install libfftw3-dev libglfw3-dev libglew-dev libvolk2-dev libsoapysdr-dev libairspyhf-dev libiio-dev libad9361-dev portaudio19-dev libhackrf-dev
sudo dpkg -i sdrpp_debian_amd64.debIf libvolk2-dev is not available, use libvolk1-dev.
TODO
TODO
- cmake
- vcpkg
- PothosSDR (This will install libraires for most SDRs)
After this, install the following depencies using vcpkg:
- fftw3
- portaudio
- glfw
- glew
mkdir build
cd build
cmake .. "-DCMAKE_TOOLCHAIN_FILE=C:/Users/Alex/vcpkg/scripts/buildsystems/vcpkg.cmake" -G "Visual Studio 15 2017 Win64"
cmake --build . --config Release
./create_root.bat
If you wish to install SDR++, skip to the next step
You will first need to edit the root_dev/config file to point to the modules that were built. Here us a sample if what it would look like:
...
"modules": [
"./build/radio/Release/radio.dll",
"./build/recorder/Release/recorder.dll",
"./build/rtl_tcp_source/Release/rtl_tcp_source.dll",
"./build/soapy_source/Release/soapy_source.dll",
"./build/audio_sink/Release/audio_sink.dll"
]
...You also need to change the location of the resource and module directories, for development, I recommend:
...
"modulesDirectory": "../root_dev/modules",
...
"resourcesDirectory": "../root_dev/res",
...Remember that these paths will be relative to the run directory.
Off cours, remember to add entries for all modules that were built and that you wish to use.
Next, from the top directory, you can simply run:
./build/Release/sdrpp.exe -r root_dev
Or, if you wish to run from the build directory:
./Release/sdrpp.exe -r ../root_dev
If you chose to run SDR++ for development, you do not need this step.
First, copy over the exe and DLLs from build/Release/ to root_dev.
Next you need to copy over all the modules that were compiled. To do so, copy the DLL file of the module (located in its build folder given below) to the root_dev/modules directory and other DLLs (that do not have the exact name of the modue) to the root_dev directory.
The modules built will be some of the following (Repeat the instructions above for all you wish to use):
build/radio/Release/build/recorder/Release/build/rtl_tcp_source/Release/build/spyserver_source/Release/build/soapy_source/Release/build/airspyhf_source/Release/build/plutosdr_source/Release/build/audio_sink/Release/
- cmake
- fftw3
- glfw
- glew
- libvolk
Next install dependencies based on the modules you wish to build:
- soapy_source: SoapySDR + drivers for each SDRs (see SoapySDR docs)
- airspyhf_source: libairspyhf
- plutosdr_source: libiio, libad9361
- audio_sink: portaudio
Note: make sure you're using GCC 8 or later as older versions do not have std::filesystem built-in.
replace <N> with the number of threads you wish to use to build
mkdir build
cd build
cmake ..
make -j<N>sh ./create_root.shIf you wish to install SDR++, skip to the next step
First run SDR++ from the build directory to generate a default config file
./sdrpp -r ../root_dev/
Then, you need to edit the root_dev/config file to point to the modules that were built. Here us a sample if what it would look like:
...
"modules": [
"./build/radio/radio.so",
"./build/recorder/recorder.so",
"./build/rtl_tcp_source/rtl_tcp_source.so",
"./build/soapy_source/soapy_source.so",
"./build/audio_sink/audio_sink.so"
]
...Note: You can generate this list automatically by running find . | grep '\.so' | sed 's/^/"/' | sed 's/$/",/' | sed '/sdrpp_core.so/d' in the build directory.
You also need to change the location of the resource and module directories, for development, I recommend:
...
"modulesDirectory": "./root_dev/modules",
...
"resourcesDirectory": "./root_dev/res",
...Remember that these paths will be relative to the run directory.
Off cours, remember to add entries for all modules that were built and that you wish to use.
Next, from the top directory, you can simply run:
./build/sdrpp -r root_dev
Or, if you wish to run from the build directory, you need to correct directories in config.json, and:
./sdrpp -r ../root_dev
Coming soon!
Feel free to issue pull request and report bugs via the github issues. I will soon publish a contributing.md listing the code style to use.