Achronite/node-red-contrib-energenie-ener314rt

Issues

• Remove deprecated 'Control & Monitor' node

  #76 opened a year ago by Achronite
  0

• Thermostat icon disappears when dragged to flow (v0.7)

  #74 opened a year ago by Achronite
  0

• Add MiHome Click support

  #75 opened a year ago by Achronite
  0

• Bump energenie-ener314rt to v0.7.x

  #72 opened a year ago by Achronite
  0

• Add MiHome thermostat support

  #36 opened a year ago by red-kooga
  52

• Support for ENER314?

  #71 opened a year ago by daxliniere
  2

• Duplicate Openthings Listing

  #70 opened 2 years ago by genestealer
  2

• MIHO013 eTRV: VALVE_STATE

  #65 opened 2 years ago by genestealer
  7

• MIH0032 - PIR Sensor Trigger Causing Buffer Overflow

  #67 opened 2 years ago by hazzakins
  6

• Issue in: node-red-contrib-energenie-ener314rt FAQ

  #68 opened 2 years ago by genestealer
  1

• Queued commands for MIHO013 eTRV

  #64 opened 2 years ago by genestealer
  3

• Add support for home assistant via node-red

  #28 opened 5 years ago by Achronite
  2

• Testing of MiHome Thermostat (MIHO069)

  #63 opened 2 years ago by sgulati-hub
  2

• Control/OOK Receive 0 (all in zone) strange behaviour

  #61 opened 2 years ago by GeoffNT
  5

• Add learning of energenie remote controller

  #2 opened 2 years ago by Achronite
  1

• Add specific support for MiHome House Monitor

  #57 opened 2 years ago by Achronite
  1

• Can these nodes detect button presses on a remote?

  #60 opened 2 years ago by GeoffNT
  2

• MIHO010 doesn't dim

  #59 opened 2 years ago by GeoffNT
  4

• Control & monitor sockets receiving events for other devices

  #58 opened 3 years ago by Achronite
  1

• Not an issue, but a question please.

  #56 opened 3 years ago by pmh1947
  6

• Add msg.payload.on parameter for switching devices

  #53 opened 3 years ago by Achronite
  0

• Do not allow eTRV to be selectable in C&M nodes

  #19 opened 3 years ago by Achronite
  2

• Rename 'Control & Monitor' node to 'Thermostat'

  #54 opened 3 years ago by Achronite
  1

• Make switch status messages consistant

  #48 opened 4 years ago by Achronite
  0

• Add new node for light dimmer

  #46 opened 4 years ago by Achronite
  0

• TypeError: Cannot read property 'log' of undefined

  #49 opened 4 years ago by crushedbits
  10

• Make C&M Node be specific for Smart Plug+

  #37 opened 4 years ago by Achronite
  0

• Add better support for MiHome Motion Sensor

  #40 opened 4 years ago by Achronite
  0

• Add new node for open windor/door sensor

  #43 opened 4 years ago by Achronite
  0

• Decouple v0.3.x from v0.4.x of energenie-ener314rt

  #38 opened 4 years ago by Achronite
  0

• Software failed to install

  #35 opened 5 years ago by husseymj
  2

• fix raw output node

  #31 opened 5 years ago by Achronite
  0

• Stop all functions when board does not initialise

  #27 opened 5 years ago by Achronite
  1

• Refactor OT learn/search mode to use the Rx Thread

  #21 opened 5 years ago by Achronite
  1

• Only emit monitor msgs to target device

  #16 opened 5 years ago by Achronite
  0

• Unable to initialise Energenie ENER314-RT board error: -1

  #14 opened 5 years ago by red-kooga
  24

• Fix issue with teaching OOK device from GUI

  #22 opened 5 years ago by Achronite
  0

• Separate node addon from node-red implementation

  #8 opened 5 years ago by Achronite
  0

• Unable to install this using node js version v12.13.1

  #12 opened 5 years ago by absk1s3
  1

• Create separate process to handle Rx/Tx

  #9 opened 5 years ago by Achronite
  0

• TypeError: Cannot read property 'push' of undefined

  #15 opened 5 years ago by Achronite
  0

• Add support for changing OpenThings encryption key

  #3 opened 5 years ago by Achronite
  0

• Add control node for radiator valve

  #4 opened 5 years ago by Achronite
  1

• Migrate C calls to use node.js N-API instead of ffi

  #7 opened 5 years ago by Achronite
  3

• Add option to force ON/OFF requests to succeed for C&M node

  #5 opened 6 years ago by Achronite
  0