Pinned Repositories
Ackmanaiac-BLDC-Tool-Mod
mod verson 2.54
Ackmaniac-Firmware-Mod
Ackmaniac-Firmware-Mod 2.54
ACKMANIAC-MOD
Original by Vedder
bldc
The code for my custom BLDC controller.
bldc-tool
bldc-tool-1
A Qt program to control and debug my BLDC-controller
esphome-jk-bms-can
ESPHome component to monitor a Jikong Battery Management System (JK-BMS) via RS485 or BLE, CAN bus Goodwe/Pylon
Marlin
Marlin is an optimized firmware for RepRap 3D printers based on the Arduino platform. Many commercial 3D printers come with Marlin installed. Check with your vendor if you need source code for your specific machine.
Modded-BLDC-Tool
Modded BLDC-Tool with Watt control, ppm cruise control for dual VESC and throttle curve adjustment
vesc_tool
The source code for Ackmaniac-ESC Tool.
Ackmaniac's Repositories
Ackmaniac/bldc
The code for my custom BLDC controller.
Ackmaniac/esphome-jk-bms-can
ESPHome component to monitor a Jikong Battery Management System (JK-BMS) via RS485 or BLE, CAN bus Goodwe/Pylon
Ackmaniac/vesc_tool
The source code for Ackmaniac-ESC Tool.
Ackmaniac/Ackmanaiac-BLDC-Tool-Mod
mod verson 2.54
Ackmaniac/Ackmaniac-Firmware-Mod
Ackmaniac-Firmware-Mod 2.54
Ackmaniac/ACKMANIAC-MOD
Original by Vedder
Ackmaniac/bldc-tool
Ackmaniac/bldc-tool-1
A Qt program to control and debug my BLDC-controller
Ackmaniac/Marlin
Marlin is an optimized firmware for RepRap 3D printers based on the Arduino platform. Many commercial 3D printers come with Marlin installed. Check with your vendor if you need source code for your specific machine.
Ackmaniac/Modded-BLDC-Tool
Modded BLDC-Tool with Watt control, ppm cruise control for dual VESC and throttle curve adjustment
Ackmaniac/VescMod
This is a mod which provides a new Control mode, cruise control via dual VESC and Throttle Curve adjustment