/AVR-tutorials

The AVR-GCC example code used in the tutorials throughout my site

Primary LanguageMakefile

This repo contains all of my AVR example code used in the tutorials throughout my site

More Information

This repo contains the following examples:

  • 74HC573 -> How to add more output pins to an AVR
  • HMC5883L -> How to read out the HMC5883L compass module via I2C
  • SPI -> several examples of using the SPI bus
  • Servo -> How to control a servo with an AVR
  • SRF05 -> How to read out the SRF05 ultra sonic range sensor
  • Software PWM 1 -> How to create a PWM signal in software (high frequencies)
  • Software PWM 2 -> How to create a PWM signal in software (interrupt driven, low frequencies)
  • UART servo controller -> How to control up to 8 servos via UART

Please provide a link to this website if you post this on a forum or if you redistribute/modify it