Pinned Repositories
BIGTREETECH-TouchScreenFirmware
support TFT35 V1.0/V1.1/V1.2/V2.0/V3.0, TFT28, TFT24 V1.1, TFT43, TFT50, TFT70
Configurations
Configurations for Marlin Firmware
DD-L0-LA59-Animatronics
DD L0-LA59 (LOLA) Animatronics
Klipper-for-Elegoo-Neptune-series-3D-Printers
run Klipper on your neptune 2, 2s, 3, 3pro, etc!
Marlin
Marlin is an optimized firmware for RepRap 3D printers based on the Arduino platform. | Many commercial 3D printers come with Marlin installed. Check with your vendor if you need source code for your specific machine.
Neptune-3-Plus-Klipper-Config
Contains my Klipper configuration for the Elegoo Neptune 3 Plus
Neptune_3_Pro_Plus_Max
Elegoo Neptune 3 Pro, Plus and Max Firmware file
PrusaSlicer-Neptune
PrusaSlicer Neptune
SKR-V1.4-Turbo-Stepper-Driver-Jumper-Configuration-Manual
SKR V1.4 TURBO Stepper Driver Jumper Configuration Manual
PrusaSlicer
G-code generator for 3D printers (RepRap, Makerbot, Ultimaker etc.)
Aiddy81's Repositories
Aiddy81/BIGTREETECH-TouchScreenFirmware
support TFT35 V1.0/V1.1/V1.2/V2.0/V3.0, TFT28, TFT24 V1.1, TFT43, TFT50, TFT70
Aiddy81/Configurations
Configurations for Marlin Firmware
Aiddy81/DD-L0-LA59-Animatronics
DD L0-LA59 (LOLA) Animatronics
Aiddy81/Klipper-for-Elegoo-Neptune-series-3D-Printers
run Klipper on your neptune 2, 2s, 3, 3pro, etc!
Aiddy81/Marlin
Marlin is an optimized firmware for RepRap 3D printers based on the Arduino platform. | Many commercial 3D printers come with Marlin installed. Check with your vendor if you need source code for your specific machine.
Aiddy81/Neptune-3-Plus-Klipper-Config
Contains my Klipper configuration for the Elegoo Neptune 3 Plus
Aiddy81/Neptune_3_Pro_Plus_Max
Elegoo Neptune 3 Pro, Plus and Max Firmware file
Aiddy81/PrusaSlicer-Neptune
PrusaSlicer Neptune
Aiddy81/SKR-V1.4-Turbo-Stepper-Driver-Jumper-Configuration-Manual
SKR V1.4 TURBO Stepper Driver Jumper Configuration Manual