Supported Architectures:
Architectures officially supported by this Docker container:
PLCComS
Dockerized PLCComS - Communication server for TECO PLC (Foxtrot, TC700 and SoftPLC)
Function
Communication server provides TCP/IP connection with client device and a PLC. Communication of server with client is created by simple text oriented protocol - question/answer. Server communicates with PLS by optimalized EPSNET protocol.
- PLCComS (SW) EN - PLCComS - Communication server
- PLCComS (SW) CZ - PLCComS - komunikacni server
How to Run this container
Running from Docker Hub
# pull from docker hub
$> docker pull rosiste/plccoms:latest
# run PLCComS container
$> docker run --name=plccoms \
--restart=always \
--detach \
--publish=5010:5010/tcp \
-e TZ=Europe/Prague \
-v plccoms_log:/var/log/teco \
-v plccoms_etc:/etc/teco \
rosiste/plccoms
Configuration
When first started, the configuration file PLCComS.ini in directory /etc/teco contain default values from TECO. Therefore, it is essential to adjust these values according to your environment. This is especially the ip address and port of the PLC and the location of *.pub files. All configuration variables are described in default PLCComS.ini file.
Example of PLCComS.ini file when using default file locations:
[INELS]
IPADDR = 192.168.1.1
SERVER_PORT = 5010
PUBFILE_CRC = No
PUBFILE_WRITE = No
PUBFILE_FIXED = ../../etc/teco/FIXED_Foxtrot.pub
PUBFILE = ../../etc/teco/inels.pub
All file paths must be specified as relative from /opt/teco. The inels.pub file contains the export of variables from the PLC, for example from the IDM software.
Author
Jaroslav Vacha
Final thanks
Big thanks to Phill Paraphraser for his ideas for improvement.