Based on RtkBase
-
Connect your ELT0229/ELT0219 to your raspberry pi/orange pi/....
-
Open a terminal and:
wget https://raw.githubusercontent.com/GNSSOEM/UM980_RPI_Hat_RtkBase/main/install.sh chmod +x install.sh ./install.sh
-
RTFM
- ./install.sh -1 for part of installation without receiver
- ./install.sh -2 for part of installation with receiver
- Full configure for Unicore receiver and RPI
- If mount and password are both TCP use TCP-client instead of NTRIP-server. It's need for rtkdirect.com
- Setup base position to Unicore receiver
- Timeout for PPP-solution is extended to 36 hours
- Add port 5017 for direct configure Unicore Receiver
- Default settings is adopted to Unicore receiver, onocoy.com and rtkdirect.com
- Windows RTK & HAS utilitis for precise resolving rtkbase position
- Zeroconf configuration as rtkbase.local in the local network
UM980_RPI_Hat_RtkBase is licensed under AGPL 3 (see LICENSE file).
UM980_RPI_Hat_RtkBase uses RtkBase (GPL v3)