About
xow is a Linux user mode driver for the Xbox One wireless dongle.
It communicates with the dongle via libusb and provides joystick input through the uinput kernel module.
The input mapping is based on existing kernel drivers like xpad.
Important notes
The Xbox One wireless dongle requires a proprietary firmware to operate. The firmware is included with the Xbox - Net - 7/11/2017 12:00:00 AM - 1.0.46.1 driver available from Microsoft Update Catalog. The package is automatically downloaded and extracted during the build process due to Microsoft's Terms of Use, which strictly disallow the distribution of the firmware. By using xow, you accept Microsoft's license terms for their driver package.
Supported devices
xow supports both versions of the wireless dongle (slim and bulky one). The following Xbox One controllers are currently compatible with the driver:
| Model number | Year | Additional information | Status |
|---|---|---|---|
| 1537 | 2013 | Original controller | Working |
| 1697 | 2015 | Audio jack | Working |
| 1698 | 2015 | Elite controller | Working |
| 1708 | 2016 | Bluetooth connectivity | Working |
| 1797 | 2019 | Elite controller series 2 | Working |
| 1914 | 2020 | Share button and USB-C | Untested |
Releases
Linux distributions
Third-party hardware
- EmuELEC (starting with version 3.3)
- GamerOS (starting with version 13)
- Steam Link (starting with build 747)
Feel free to create prebuilt releases of xow for any Linux distribution or hardware you like. Any issues regarding the packaging should be reported to the respective maintainers.
Installation
Prerequisites
- Linux (kernel 4.5 or newer)
- curl (for proprietary driver download)
- cabextract (for firmware extraction)
- libusb (libusb-1.0-0-dev for Debian)
- systemd (version 232 or newer)
Clone the repository (necessary for version tagging to work):
git clone https://github.com/medusalix/xow
Build xow using the following command:
make BUILD=RELEASE
NOTE: Please use BUILD=DEBUG when asked for your debug logs.
Install xow as a systemd service (starts xow at boot time):
sudo make install
sudo systemctl enable xow
sudo systemctl start xow
NOTE: A reboot might be required for xow to work correctly.
Updating
Make sure to completely uninstall xow before updating:
sudo systemctl stop xow
sudo systemctl disable xow
sudo make uninstall
Interoperability
You can enable the dongle's pairing mode by sending the SIGUSR1 signal to xow:
sudo systemctl kill -s SIGUSR1 xow
NOTE: Signals are only handled after a dongle has been plugged in. The default behavior for SIGUSR1 is to terminate the process.
Troubleshooting
Error messages
InputException: No such file or directory- Make sure that
/dev/uinputis available (requires theuinputkernel module).
- Make sure that
InputException: Permission denied- Make sure that the
udevrules are correctly installed and that the permissions for/dev/uinputallow read and write access. There might be conflicts with existingudevrules on some systems that need to be resolved.
- Make sure that the
Mt76ExceptionorLIBUSB_ERROR_NO_DEVICE- Make sure that you are only running one instance of xow at a time.
If you are running xow manually you have to stop the
systemdservice.
- Make sure that you are only running one instance of xow at a time.
If you are running xow manually you have to stop the
Configuration issues
- Certain games do not detect wireless controllers
- Enable the compatibility mode in the service configuration, reload the
systemddaemon and restart the service. Controllers connected to the dongle will appear as Xbox 360 controllers.
- Enable the compatibility mode in the service configuration, reload the
- Buttons/triggers/sticks are mapped incorrectly
- Try the options listed on this page to remap your inputs.
- Input from the sticks is jumping around
- Try the options listed on this page to set your deadzones.
USB incompatibilities
Please avoid plugging your wireless dongle into a USB port that uses an ASMedia controller.
Intel USB controllers are known to work well with xow.
Other problems
In case of any other problems, please open an issue with all the relevant details (dongle version, controller version, logs, captures, etc.).
NOTE: Please refrain from creating issues concerning input remapping, deadzones or game compatibility as these topics are outside the scope of this project.
How it works
The dongle's wireless chip (MT76xx) handles the WLAN connection with individual controllers.
The packet format follows Microsoft's undisclosed GIP (Game Input Protocol) specification.
Most of the reverse engineering was done by capturing the communication between the dongle and a Windows PC using Wireshark.
As no datasheets for this chip are publicly available, I have used datasheets of similar wireless radios for assistance.
Special thanks to the authors of OpenWrt's mt76 kernel driver.
It would have been impossible for me to create this driver without mt76's source code.
If anyone has a greater understanding of the GIP or the weird quirks I had to add to make the driver work, please contact me.
License
xow is released under the GNU General Public License, Version 2.
Copyright (C) 2019 Medusalix
This program is free software; you can redistribute it and/or
modify it under the terms of the GNU General Public License
as published by the Free Software Foundation; either version 2
of the License, or (at your option) any later version.