BOM

Question

BOM

maximilianschulte opened this issue 6 months ago · 6 comments

maximilianschulte commented 6 months ago

Could you make the BOM's (especially for ATMEGA328P_NO_HEADER) more specific. There are some parts that are not described, espacially the crystal oscillator and the capacitors. I'd also be interested in the 12 pin connector used as the fanatec connector. I'm quiet new to all that stuff, so sorry in advance if i missed anything.

Answer 1 · 2024-04-30T11:03:29.000Z

Hi, to help you start, AliExpress kits for ATMEGA328p are a good base with included oscillator https://a.aliexpress.com/_EJlHjkn About the Fanatec connector you mean the QR pins of the 12x 2mm pitch pins on the PCB? Le 30 avr. 2024 à 11:45, maximilianschulte ***@***.***> a écrit : Could you make the BOM's (especially for ATMEGA328P_NO_HEADER) more specific. There are some parts that are not described, espacially the crystal oscillator and the capacitors. I'd also be interested in the 12 pin connector used as the fanatec connector. I'm quiet new to all that stuff, so sorry in advance if i missed anything. — Reply to this email directly, view it on GitHub<#12>, or unsubscribe<https://github.com/notifications/unsubscribe-auth/AEB36DWFOAB2AKPULXQEEFTY75R2LAVCNFSM6AAAAABG75FNI2VHI2DSMVQWIX3LMV43ASLTON2WKOZSGI3TCMBQGQ4TEMI>. You are receiving this because you are subscribed to this thread.Message ID: ***@***.***>

Answer 2 · 2024-04-30T12:33:09.000Z

No i mean the white connector comming from the ribbon cable. Thanks for the Atmega Kit, already ordered it.

Answer 3 · 2024-04-30T12:55:57.000Z

Ok, it’s a classical 2mm pitch JST phr connector. You have the female coming from the base. For the male part you have to solder on the PcB (2mm pitch pin) : https://a.aliexpress.com/_EJcDAJt You can find straight ones or elbowed ones depending on your need. Le 30 avr. 2024 à 14:33, maximilianschulte ***@***.***> a écrit : No i mean the white connector comming from the ribbon cable. Thanks for the Atmega Kit, already ordered it. — Reply to this email directly, view it on GitHub<#12 (comment)>, or unsubscribe<https://github.com/notifications/unsubscribe-auth/AEB36DTGMJILS4WWT2KBLKTY76FRXAVCNFSM6AAAAABG75FNI2VHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDAOBVGIYDSMRVGY>. You are receiving this because you commented.Message ID: ***@***.***>

Answer 4 · 2024-05-20T15:05:05.000Z

Hi , i don't find the 4n7001 diod for full pro micro have you a link ?

Answer 5 · 2024-05-29T05:47:43.000Z

Hi, sorry for late reply, there’s a mistake in item code, it’s 1N4001 diod

Answer 6 · 2024-05-29T05:48:44.000Z

Its role is to have a voltage drop of the 5V to 3,7v on miso line