Pinned Repositories
Amplifier-Project
Arduino-Thermostat
This is a project to create a Arduino powered home thermostat. Version 1 PCB schematic and design is complete.
Insignia-Receiver-RE
Reverse Engineering an Insignia 2 Channel Stereo Receiver
Switched-Outlet-Switcher
A device to allow me to turn off the lights connected to a switched outlet and still retain full control via the switch.
Tesla-Dash-Gauge
TLM-18-Wrap-Up-Supervisor
A monitor system to keep track of the number of consecutive 'wraps' the azimuth axis of the TLM-18 radio telescope has completed.
Volvo-CAN-Gauge
Reverse engineering the Volvo VIDA protocol and CAN network to gather diagnostic information not available via OBD2 on Volvo cars.
Alfaa123's Repositories
Alfaa123/Volvo-CAN-Gauge
Reverse engineering the Volvo VIDA protocol and CAN network to gather diagnostic information not available via OBD2 on Volvo cars.
Alfaa123/Arduino-Thermostat
This is a project to create a Arduino powered home thermostat. Version 1 PCB schematic and design is complete.
Alfaa123/Amplifier-Project
Alfaa123/Insignia-Receiver-RE
Reverse Engineering an Insignia 2 Channel Stereo Receiver
Alfaa123/Switched-Outlet-Switcher
A device to allow me to turn off the lights connected to a switched outlet and still retain full control via the switch.
Alfaa123/Tesla-Dash-Gauge
Alfaa123/TLM-18-Wrap-Up-Supervisor
A monitor system to keep track of the number of consecutive 'wraps' the azimuth axis of the TLM-18 radio telescope has completed.