This scripts connnects to a Cisco device from a file, (other vendros should work) using netmiko, then run the commands from anotehr file that is speciied in the command line.
usage: NetmikoVerificationAutomationV1.py [-h] [--ping] devices commands
Script to connect to cisco devices and run show commands
positional arguments: devices Name of the device file commands Name of the command file
Ex Output :
'''
System image file is "flash:cat3k_caa-universalk9.16.09.04.SPA.bin"
Capability Codes: R - Router, T - Trans Bridge, B - Source Route Bridge S - Switch, H - Host, I - IGMP, r - Repeater, P - Phone, D - Remote, C - CVTA, M - Two-port Mac Relay
Device ID Local Intrfce Holdtme Capability Platform Port ID
Total cdp entries displayed : 0 '''
Afterwards it writes the output of these commands to a txt file in the directory that you run the script from.
Next feautrse will be the ability to add config commands.