Hackpad

https://hackpad.hackclub.com/ <- website is live! this is probably a better place to start

Overview

This is a limited-time introductory YSWS (you ship, we ship) where you design your own macropad, and we'll ship it to you for free! This is something you definitely don't want to miss out, so make sure to join #hackpad in the slack!

You ship:

A PCB Design and schematic
Files for a case, either in STL or DXF format.
Firmware for the keyboard. You are allowed to use QMK or other pre-existing firmware!

We'll send you:

3 PCBs! Keep one for yourself, or share some with your friends. Or you can keep them all, I won't judge.
a Seeed XIAO RP2040 microcontroller. They're pretty nifty microcontrollers, so you can use them for something else too
Switches! Choices TBD, but you'll have a great selection
Other components you may need, such as LEDs, diodes, knobs, OLED screens, and more!
Your case! You can either have it 3D printed, laser cut in acrylic, or both.
A grab bag of DSA keycaps, and a custom Hack Club keycap too

You can get the macropads soldered if you don't have a soldering iron, or we can send you the parts directly if you're up for a soldering task. The only catch is that if you want it to be soldered, you must use through-hole components only!

Requirements:

You design a macropad that integrates a Seeed XIAO RP2040 as the main MCU. Nothing else allowed, sorry!
It has 20 or less inputs. A single input includes a rotary encoder, switch etc.
It is meaningfully unique to you. This could be as simple as making a custom layout and adding some decor, or as elaborate as writing an entire firmware in Rust
The PCB only uses 2 layers
The PCB does not exceed 100mm in length in any direction
Don't make a macropad with 40 screens. Or out of pure gold. Please!!

Once that's done, you can go on and make a PR. The instructions will be in the template.

Anything else?

This YSWS is only guaranteed to run through October 21st, so make sure to get yours submitted before then. Depending on skill level, this should take roughly 6-12 hours to finish.