Dassl

Introduction

Dassl is a PyTorch toolbox initially developed for our project Domain Adaptive Ensemble Learning (DAEL) to support research in domain adaptation and generalization---since in DAEL we study how to unify these two problems in a single learning framework. Given that domain adaptation is closely related to semi-supervised learning---both study how to exploit unlabeled data---we also incorporate components that support research for the latter.

Why the name "Dassl"? Dassl combines the initials of domain adaptation (DA) and semi-supervised learning (SSL), which sounds natural and informative.

Dassl has a modular design and unified interfaces, allowing fast prototyping and experimentation of new DA/DG/SSL methods. With Dassl, a new method can be implemented with only a few lines of code. Don't believe? Take a look at the engine folder, which contains the implementations of many existing methods (then you will come back and star this repo). :-)

Basically, Dassl is perfect for doing research in the following areas:

Domain adaptation
Domain generalization
Semi-supervised learning

BUT, thanks to the neat design, Dassl can also be used as a codebase to develop any deep learning projects, like this. :-)

A drawback of Dassl is that it doesn't (yet? hmm) support distributed multi-GPU training (Dassl uses DataParallel to wrap a model, which is less efficient than DistributedDataParallel).

We don't provide detailed documentations for Dassl, unlike another project of ours. This is because Dassl is developed for research purpose and as a researcher, we think it's important to be able to read source code and we highly encourage you to do so---definitely not because we are lazy. :-)

What's new

[Jun 2022] v0.6.0: Make cfg.TRAINER.METHOD_NAME consistent with the method class name.
[Jun 2022] A new domain adaptation method CDAC (CVPR'21) is added by Shreejal Trivedi. See here for more details.
[Jun 2022] Adds three datasets from the WILDS benchmark: iWildCam, FMoW and Camelyon17. See here for more details.
[May 2022] A new domain generalization method DDG developed by Zhishu Sun and to appear at IJCAI'22 is added to this repo. See here for more details.
[Mar 2022] A new domain generalization method EFDM developed by Yabin Zhang (PolyU) and to appear at CVPR'22 is added to this repo. See here for more details.
[Feb 2022] In case you don't know, a class in the painting domain of DomainNet (the official splits) only has test images (no training images), which could affect performance. See section 4.a in our paper for more details.
[Oct 2021] v0.5.0: Important changes made to transforms.py. 1) center_crop becomes a default transform in testing (applied after resizing the smaller edge to a certain size to keep the image aspect ratio). 2) For training, Resize(cfg.INPUT.SIZE) is deactivated when random_crop or random_resized_crop is used. These changes won't make any difference to the training transforms used in existing config files, nor to the testing transforms unless the raw images are not squared (the only difference is that now the image aspect ratio is respected).
[Oct 2021] v0.4.3: Copy the attributes in self.dm (data manager) to SimpleTrainer and make self.dm optional, which means from now on, you can build data loaders from any source you like rather than being forced to use DataManager.
[Sep 2021] v0.4.2: An important update is to set drop_last=is_train and len(data_source)>=batch_size when constructing a data loader to avoid 0-length.

[Aug 2021] v0.4.0: The most noteworthy update is adding the learning rate warmup scheduler. The implementation is detailed here and the config variables are specified here.
[Jul 2021] v0.3.4: Adds a new function generate_fewshot_dataset() to the base dataset class, which allows for the generation of a few-shot learning setting. One can customize a few-shot dataset by specifying _C.DATASET.NUM_SHOTS and give it to generate_fewshot_dataset().
[Jul 2021] v0.3.2: Adds _C.INPUT.INTERPOLATION (default: bilinear). Available interpolation modes are bilinear, nearest, and bicubic.
[Jul 2021 v0.3.1: Now you can use *.register(force=True) to replace previously registered modules.
[Jul 2021 v0.3.0: Allows to deploy the model with the best validation performance for final test (for the purpose of model selection). Specifically, a new config variable named _C.TEST.FINAL_MODEL is introduced, which takes either "last_step" (default) or "best_val". When set to "best_val", the model will be evaluated on the val set after each epoch and the one with the best validation performance will be saved and used for final test (see this code).
[Jul 2021 v0.2.7: Adds attribute classnames to the base dataset class. Now you can get a list of class names ordered by numeric labels by calling trainer.dm.dataset.classnames.
[Jun 2021 v0.2.6: Merges MixStyle2 to MixStyle. A new variable self.mix is used to switch between random mixing and cross-domain mixing. Please see this for more details on the new features.
[Jun 2021 v0.2.5: Fixs a bug in the calculation of per-class recognition accuracy.
[Jun 2021 v0.2.4: Adds extend_cfg(cfg) to train.py. This function is particularly useful when you build your own methods on top of Dassl.pytorch and need to define some custom variables. Please see the repository mixstyle-release or ssdg-benchmark for examples.
[Jun 2021 New benchmarks for semi-supervised domain generalization at https://github.com/KaiyangZhou/ssdg-benchmark.
[Apr 2021 Do you know you can use tools/parse_test_res.py to read the log files and automatically calculate and print out the results including mean and standard deviation? Check the instructions in tools/parse_test_res.py for more details.
[Apr 2021 v0.2.3: A MixStyle layer can now be deactivated or activated by using model.apply(deactivate_mixstyle) or model.apply(activate_mixstyle) without modifying the source code. See dassl/modeling/ops/mixstyle.py for the details.
[Apr 2021 v0.2.2: Adds RandomClassSampler, which samples from a certain number of classes a certain number of images to form a minibatch (the code is modified from Torchreid).
[Apr 2021 v0.2.1: Slightly adjusts the ordering in setup_cfg() (see tools/train.py).
[Apr 2021 v0.2.0: Adds _C.DATASET.ALL_AS_UNLABELED (for the SSL setting) to the config variable list. When this variable is set to True, all labeled data will be included in the unlabeled data set.
[Apr 2021 v0.1.9: Adds VLCS to the benchmark datasets (see dassl/data/datasets/dg/vlcs.py).
[Mar 2021 v0.1.8: Allows optim and sched to be None in register_model().
[Mar 2021 v0.1.7: Adds MixStyle models to dassl/modeling/backbone/resnet.py. The training configs in configs/trainers/dg/vanilla can be used to train MixStyle models.
[Mar 2021 v0.1.6: Adds CIFAR-10/100-C to the benchmark datasets for evaluating a model's robustness to image corruptions.
[Mar 2021 We have just released a survey on domain generalization at https://arxiv.org/abs/2103.02503, which summarizes the ten-year development in this topic with coverage on the history, related problems, datasets, methodologies, potential directions, and so on.
[Jan 2021 Our recent work, MixStyle (mixing instance-level feature statistics of samples of different domains for improving domain generalization), is accepted to ICLR'21. The code is available at https://github.com/KaiyangZhou/mixstyle-release where the cross-domain image classification part is based on Dassl.pytorch.
[May 2020 v0.1.3: Adds the Digit-Single dataset for benchmarking single-source DG methods. The corresponding CNN model is dassl/modeling/backbone/cnn_digitsingle.py and the dataset config file is configs/datasets/dg/digit_single.yaml. See Volpi et al. NIPS'18 for how to do evaluation.
[May 2020 v0.1.2: 1) Adds EfficientNet models (B0-B7) (credit to https://github.com/lukemelas/EfficientNet-PyTorch). To use EfficientNet, set MODEL.BACKBONE.NAME to efficientnet_b{N} where N={0, ..., 7}. 2) dassl/modeling/models is renamed to dassl/modeling/network (build_model() to build_network() and MODEL_REGISTRY to NETWORK_RESIGTRY).

Overview

Dassl has implemented the following methods:

Feel free to make a PR to add your methods here to make it easier for others to benchmark!

Dassl supports the following datasets:

Domain adaptation
- Office-31
- Office-Home
- VisDA17
- CIFAR10-STL10
- Digit-5
- DomainNet
- miniDomainNet
Domain generalization
- PACS
- VLCS
- Office-Home
- Digits-DG
- Digit-Single
- CIFAR-10-C
- CIFAR-100-C
- iWildCam-WILDS
- Camelyon17-WILDS
- FMoW-WILDS
Semi-supervised learning
- CIFAR10/100
- SVHN
- STL10

Get started

Installation

Make sure conda is installed properly.

# Clone this repo
git clone https://github.com/KaiyangZhou/Dassl.pytorch.git
cd Dassl.pytorch/

# Create a conda environment
conda create -y -n dassl python=3.8

# Activate the environment
conda activate dassl

# Install torch (requires version >= 1.8.1) and torchvision
# Please refer to https://pytorch.org/ if you need a different cuda version
conda install pytorch torchvision cudatoolkit=10.2 -c pytorch

# Install dependencies
pip install -r requirements.txt

# Install this library (no need to re-build if the source code is modified)
python setup.py develop

Follow the instructions in DATASETS.md to preprocess the datasets.

Training

The main interface is implemented in tools/train.py, which basically does

initialize the config with cfg = setup_cfg(args) where args contains the command-line input (see tools/train.py for the list of input arguments);
instantiate a trainer with build_trainer(cfg) which loads the dataset and builds a deep neural network model;
call trainer.train() for training and evaluating the model.

Below we provide an example for training a source-only baseline on the popular domain adaptation dataset, Office-31,

CUDA_VISIBLE_DEVICES=0 python tools/train.py \
--root $DATA \
--trainer SourceOnly \
--source-domains amazon \
--target-domains webcam \
--dataset-config-file configs/datasets/da/office31.yaml \
--config-file configs/trainers/da/source_only/office31.yaml \
--output-dir output/source_only_office31

$DATA denotes the location where datasets are installed. --dataset-config-file loads the common setting for the dataset (Office-31 in this case) such as image size and model architecture. --config-file loads the algorithm-specific setting such as hyper-parameters and optimization parameters.

To use multiple sources, namely the multi-source domain adaptation task, one just needs to add more sources to --source-domains. For instance, to train a source-only baseline on miniDomainNet, one can do

CUDA_VISIBLE_DEVICES=0 python tools/train.py \
--root $DATA \
--trainer SourceOnly \
--source-domains clipart painting real \
--target-domains sketch \
--dataset-config-file configs/datasets/da/mini_domainnet.yaml \
--config-file configs/trainers/da/source_only/mini_domainnet.yaml \
--output-dir output/source_only_minidn

After the training finishes, the model weights will be saved under the specified output directory, along with a log file and a tensorboard file for visualization.

To print out the results saved in the log file (so you do not need to exhaustively go through all log files and calculate the mean/std by yourself), you can use tools/parse_test_res.py. The instruction can be found in the code.

For other trainers such as MCD, you can set --trainer MCD while keeping the config file unchanged, i.e. using the same training parameters as SourceOnly (in the simplest case). To modify the hyper-parameters in MCD, like N_STEP_F (number of steps to update the feature extractor), you can append TRAINER.MCD.N_STEP_F 4 to the existing input arguments (otherwise the default value will be used). Alternatively, you can create a new .yaml config file to store your custom setting. See here for a complete list of algorithm-specific hyper-parameters.

Test

Model testing can be done by using --eval-only, which asks the code to run trainer.test(). You also need to provide the trained model and specify which model file (i.e. saved at which epoch) to use. For example, to use model.pth.tar-20 saved at output/source_only_office31/model, you can do

CUDA_VISIBLE_DEVICES=0 python tools/train.py \
--root $DATA \
--trainer SourceOnly \
--source-domains amazon \
--target-domains webcam \
--dataset-config-file configs/datasets/da/office31.yaml \
--config-file configs/trainers/da/source_only/office31.yaml \
--output-dir output/source_only_office31_test \
--eval-only \
--model-dir output/source_only_office31 \
--load-epoch 20

Note that --model-dir takes as input the directory path which was specified in --output-dir in the training stage.

Write a new trainer

A good practice is to go through dassl/engine/trainer.py to get familar with the base trainer classes, which provide generic functions and training loops. To write a trainer class for domain adaptation or semi-supervised learning, the new class can subclass TrainerXU. For domain generalization, the new class can subclass TrainerX. In particular, TrainerXU and TrainerX mainly differ in whether using a data loader for unlabeled data. With the base classes, a new trainer may only need to implement the forward_backward() method, which performs loss computation and model update. See dassl/enigne/da/source_only.py for example.

Add a new backbone/head/network

backbone corresponds to a convolutional neural network model which performs feature extraction. head (which is an optional module) is mounted on top of backbone for further processing, which can be, for example, a MLP. backbone and head are basic building blocks for constructing a SimpleNet() (see dassl/engine/trainer.py) which serves as the primary model for a task. network contains custom neural network models, such as an image generator.

To add a new module, namely a backbone/head/network, you need to first register the module using the corresponding registry, i.e. BACKBONE_REGISTRY for backbone, HEAD_REGISTRY for head and NETWORK_RESIGTRY for network. Note that for a new backbone, we require the model to subclass Backbone as defined in dassl/modeling/backbone/backbone.py and specify the self._out_features attribute.

We provide an example below for how to add a new backbone.

from dassl.modeling import Backbone, BACKBONE_REGISTRY

class MyBackbone(Backbone):

    def __init__(self):
        super().__init__()
        # Create layers
        self.conv = ...

        self._out_features = 2048

    def forward(self, x):
        # Extract and return features

@BACKBONE_REGISTRY.register()
def my_backbone(**kwargs):
    return MyBackbone()

Then, you can set MODEL.BACKBONE.NAME to my_backbone to use your own architecture. For more details, please refer to the source code in dassl/modeling.

Add a dataset

An example code structure is shown below. Make sure you subclass DatasetBase and register the dataset with @DATASET_REGISTRY.register(). All you need is to load train_x, train_u (optional), val (optional) and test, among which train_u and val could be None or simply ignored. Each of these variables contains a list of Datum objects. A Datum object (implemented here) contains information for a single image, like impath (string) and label (int).

from dassl.data.datasets import DATASET_REGISTRY, Datum, DatasetBase

@DATASET_REGISTRY.register()
class NewDataset(DatasetBase):

    dataset_dir = ''

    def __init__(self, cfg):
        
        train_x = ...
        train_u = ...  # optional, can be None
        val = ...  # optional, can be None
        test = ...

        super().__init__(train_x=train_x, train_u=train_u, val=val, test=test)

We suggest you take a look at the datasets code in some projects like this, which is built on top of Dassl.

Relevant Research

We would like to share here our research relevant to Dassl.

Domain Adaptive Ensemble Learning, TIP, 2021.
MixStyle Neural Networks for Domain Generalization and Adaptation, arxiv preprint, 2021.
Semi-Supervised Domain Generalization with Stochastic StyleMatch, arxiv preprint, 2021.
Domain Generalization: A Survey, arxiv preprint, 2021.
Domain Generalization with MixStyle, in ICLR 2021.
Learning to Generate Novel Domains for Domain Generalization, in ECCV 2020.
Deep Domain-Adversarial Image Generation for Domain Generalisation, in AAAI 2020.

Citation

If you find this code useful to your research, please give credit to the following paper

@article{zhou2020domain,
  title={Domain Adaptive Ensemble Learning},
  author={Zhou, Kaiyang and Yang, Yongxin and Qiao, Yu and Xiang, Tao},
  journal={IEEE Transactions on Image Processing (TIP)},
  year={2021}
}

Alxemade/Dassl.pytorch