Tion

Версия на русском языке доступна здесь.

This is a ESPHome component to control Tion 4S, Tion Lite and Tion 3S Breezers from ESP32 via BLE protocol and Tion 4S breezer via ingergation port with any ESP32/ESP8266 dongle.

At this moment the componet is build using climate platform and allows to control:

On/Off
Heater On/Off
Target temperature
Fan speed
Buzzer
Led (4S and Lite only)
Inflow/Recirculation (4S only)
Inflow/Recirculation/Mixed (3S only)
Presets
Boost preset time

And additionaly monitor:

Temperature inside
Temperature outside
Heater power (4S and Lite only)
Filter time left
Filter warnout state (4S and Lite only)
Boost time left
Airflow counter (4S and Lite only)
Current productivity (3S only)
Version

Firmware

You can find sample configuration files for Tion 4S, Tion Lite and Tion 3S (they are self-descriptive).

Download the necessary configuration for your breezer
Modify substitutions section for your preferred values
Change the set of packages to your needs
Place the modified file in the ESPHome config directory
Run the build and firmware upload of your configuration
Add the device that appears to the Home Assistant

Usage

After flashing firmware and before first run you need to enter your Breezer into the pairing mode (please follow the manual) and only then start ESP.

Additionally for Tion 3S you need to push Pair button.

WARNING: Everything that you do, you do at your own risk!

Roadmap

Reset filters support.
Support connection via hardware UART.

Issue reporting

Feel free to open issues for bug reporting and feature requests. Will accept English and Russian language.

Your thanks

If this project was useful to you or you want to support its further development you can always leave your thanks via Card2Card or PayPal.

Commercial use

For questions of commercial use or custom development/improvement, please contact me by mail dennis.trachuk at gmail.com

Anat0l/esphome-tion