This work in progress macropad is a simple macropad with 5 hot-swappable keys(with RGB of course), a rotary encoder, and an 128x32 OLED display. This is built on a custom PCB ran by an Arduino Pro Micro but can also be wired up without the custom PCB.
This firmware contains the following coded layers:
- Layer Select
- Application Launch Layer
- RGB Show Layer
- Discord Control Layer (WIP)
- Programming Layer
Checkout keymap.c for more specifics on implementation and functionality.
5 Keys, 1 Rotary Encoder, an OLED, and a Pro Micro is all you need!
- Keyboard Maintainer: Andrew Budziszek
- Hardware Supported: Pro Micro (ATMEGA32U4)
- Hardware Availability: All hardware can be found on Amazon.
Please reach out if you're interested in purchasing the PCB. I have a few extras I can sell and am willing to sell pre-built units as well.
I use QMK MSYS to build the firmware using the following command:
qmk compile -kb sb_macro -km default
I use the QMK Toolbox to flash my Pro Micro by enabling Autoflash and shorting the GND and RST pins for a quick second.
See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.