This is the client-side Flutter application for the test task. The Flutter app allows you to interact with the server-side application to store and retrieve numerical data.
Before running the Flutter client application, make sure you have the following prerequisites:
- Flutter Installation: Flutter must be installed on your system. You can follow the official installation guide for your operating system on the Flutter website.
Follow these steps to run the Flutter client application:
-
Make sure you have Flutter installed correctly.
-
Open a terminal and navigate to the project directory of your Flutter application.
-
Run the following command to build and start the Flutter app:
flutter run
This will start the Flutter app on an emulator or connected device.
Once the Flutter app is running, you can use it to interact with the server-side application. The app provides a simple user interface to increment a counter value and send it to the server for storage. It also allows you to retrieve the counter value from the server and display it on the app.
This Flutter client application is designed to work with the server-side application. The server-side application should be running and accessible at http://localhost:8080
or a custom server URL. If you haven't set up the server application yet, please refer to the respective README in the server project for instructions.
Note: This README provides instructions for the Flutter client-side application. If you want to set up the server-side application, please refer to the respective README in the server project.