Pinned Repositories
4-Pin-Bluetooth-Module-HC-06
4 Pin Bluetooth RF Transceiver Module HC-06 (GW-040)
AirQuality
PM2.5 PMS3003
Arduino-ESP8622-with-ESP-01-adapter
Thingspeak with ESP-01S ESP8266 Serial Wi-Fi Wireless Module + ESP-01 Adapter and different sensors
Arduino-OLED-0.96-SPI
Arduino OLED 0.96 SPI Serial 128X64 White 3-5V
Hamamatsu-u-Spectrometer-C12880MA
RStudio [R] Reading data from Hamamatsu u-Spectrometer C12880MA
HC06Config
Arduino sketch that helps you configure your HC-06 bluetooth module.
Neo.GPIO
A python library to control all the Neo's controls Gpio, Accelerometer, Gyroscope, Magnometer
Soil
Capacitive Soil Moisture Sensor
Teensy-3.2-and-Thingspeak
Teensy_3.2 WiFi ESP8266 ESP-01
ubidots-python
A python API client for Ubidots
AndriyHz's Repositories
AndriyHz/4-Pin-Bluetooth-Module-HC-06
4 Pin Bluetooth RF Transceiver Module HC-06 (GW-040)
AndriyHz/Arduino-ESP8622-with-ESP-01-adapter
Thingspeak with ESP-01S ESP8266 Serial Wi-Fi Wireless Module + ESP-01 Adapter and different sensors
AndriyHz/Hamamatsu-u-Spectrometer-C12880MA
RStudio [R] Reading data from Hamamatsu u-Spectrometer C12880MA
AndriyHz/HC06Config
Arduino sketch that helps you configure your HC-06 bluetooth module.
AndriyHz/Neo.GPIO
A python library to control all the Neo's controls Gpio, Accelerometer, Gyroscope, Magnometer
AndriyHz/Soil
Capacitive Soil Moisture Sensor
AndriyHz/Teensy-3.2-and-Thingspeak
Teensy_3.2 WiFi ESP8266 ESP-01
AndriyHz/ubidots-python
A python API client for Ubidots
AndriyHz/AirQuality
PM2.5 PMS3003
AndriyHz/Arduino-OLED-0.96-SPI
Arduino OLED 0.96 SPI Serial 128X64 White 3-5V
AndriyHz/arduino-station
The sensor station built by Arduino.
AndriyHz/c12880ma
c12880ma example
AndriyHz/electronics
AndriyHz/example-co2
CO2 Sensor built with Node.JS and Arduino
AndriyHz/Neo-gpio-python-library
This the python library for udoo-neo gpio pins board
AndriyHz/PhotosynQ-Firmware
This was protocols-arduino (used for MultispeQ Beta). This version is the basis for a range of devices which connect to the PhotosynQ platform. This includes the MultispeQ V1.0 and later the CoralspeQ. Other Teensy-based devices will also be able to use this firmware.
AndriyHz/serial_libraries_examples
AndriyHz/SHT1x
Arduino library to support SHT1x-series (SHT10, SHT11, SHT15) temperature / humidity sensors from Sensirion
AndriyHz/Teensy-3.2-with-sensors-and-OLED
Teensy_3.2_Work_with_OLED_0.96_SPI and Sensors +Wi-Fi ESP8622
AndriyHz/tentacle_pi
Raspberry Pi / Banana Pi / Odroid C1 compatible userspace python drivers for TWI/I2C sensors.
AndriyHz/thingspeak
ThingSpeak Python scripts
AndriyHz/thingspeak-arduino
ThingSpeak Communication Library for Arduino
AndriyHz/udooneo-arduino-libraries
UDOO Neo Arduino Library Pack